この Web ページの「後半」にある手順を動かすには、GNU make が /usr/local/bin/gmake と して、GNU tar が /usr/local/bin/gtar としてインストールされていることをお勧めします。
【目次】
【関連する外部ページ】
入手法及びライセンス条項は、 http://jp.sun.com/products/software/sundev/studio/ で確認してください。
(まだ wget をインストールしていなければ) まず、GNU wget をインストールします。 wget は各種ファイルを Web サーバ等からダウンロードするのに使えます。
この Web ページの説明は、基本的には燼 wget がインストール済みであることを前提としています。
gzip -d < wget-1.10.2.tar.gz | tar -xvf - cd wget-1.10.2 ./configure make make install
GNU make を /usr/local/bin/gmake として、 GNU tar を /usr/local/bin/gtar としてインストールします。
![[image]](https://www.kkaneko.jp/info/logo_png.png){kind=logo}
/bin/sh
# download source file
echo make-3.81
cd /tmp
if [ ! -f make-3.81.tar.gz ]; then
wget https://www.kkaneko.jp/tools/src/gnu/make-3.81.tar.gz
fi
# extract source file
cd /tmp
rm -rf make-3.81
/usr/bin/gzip -d < make-3.81.tar.gz | /usr/bin/tar -xvof -
# configure, make, and install
cd /tmp/make-3.81
mkdir build
./configure
make
make install
mv /usr/local/bin/make /usr/local/bin/gmake
# download source file
echo tar-1.18:
cd /tmp
if [ ! -f tar-1.18.tar.gz ]; then
wget https://www.kkaneko.jp/tools/src/gnu/tar-1.18.tar.gz
fi
# extract source file
cd /tmp
rm -rf tar-1.18
/usr/bin/gzip -d < tar-1.18.tar.gz | /usr/bin/tar -xvof -
# configure, make, and install
cd /tmp/tar-1.18
./configure
/usr/local/bin/gmake
/usr/local/bin/gmake install
mv /usr/local/bin/tar /usr/local/bin/gtar
次の手順で gcc-3.4.6 をインストールします。 gcc-3.4.6 の前に、GNU binutils をインストールしています
/bin/sh
# download source file
echo binutils-2.16.1:
cd /tmp
if [ ! -f binutils-2.16.1.tar.gz ]; then
wget https://www.kkaneko.jp/tools/src/gnu/binutils-2.16.1.tar.gz
fi
# extract source file
cd /tmp
rm -rf binutils-2.16.1
/usr/bin/gzip -d < binutils-2.16.1.tar.gz | /usr/bin/tar -xvof -
# preparation
rm -f /usr/local/bin/ar /usr/local/bin/sparc*-sun-solaris*-ar
rm -f /usr/local/bin/ranlib /usr/local/bin/sparc*-sun-solaris*-ranlib
rm -f /usr/local/bin/nm /usr/local/bin/sparc*-sun-solaris*-nm
rm -f /usr/local/bin/ar /usr/local/bin/i?86*-sun-solaris*-ar
rm -f /usr/local/bin/ranlib /usr/local/bin/i?86*-sun-solaris*-ranlib
rm -f /usr/local/bin/nm /usr/local/bin/i?86*-sun-solaris*-nm
# configure, make, and install
cd /tmp/binutils-2.16.1
mkdir build
cd build
../configure --prefix=/usr/local --enable-nls --enable-shared
/usr/local/bin/gmake
/usr/local/bin/gmake install
# download source file
echo gcc-3.4.6
cd /tmp
if [ ! -f gcc-3.4.6.tar.gz ]; then
wget https://www.kkaneko.jp/tools/src/gnu/gcc-3.4.6.tar.gz
fi
# extract source file
cd /tmp
rm -rf gcc-3.4.6
/usr/bin/gzip -d < gcc-3.4.6.tar.gz | /usr/bin/tar -xvof -
# configure, make, and install
cd /tmp/gcc-3.4.6
mkdir build
cd build
../configure --with-gnu-as --with-ld=/usr/ccs/bin/ld --enable-nls --enable-shared
# ../configure --with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld --disable-nls --enable-shared
/usr/local/bin/gmake bootstrap
/usr/local/bin/gmake install
/usr/local/bin/gmake clean
是非とも入れておきたい便利なライブラリとツールです。
#!/bin/sh
# For more information: https://www.kkaneko.jp/tools/solaris/solaris_optionsoft.html
#
#
#
SROOT=/tmp
SRCURL="https://www.kkaneko.jp/tools/src/toollib"
PATH=/usr/bin:/usr/sbin:/sbin:/usr/local/SUNWspro/bin:/usr/local/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/X11/bin:/usr/openwin/bin:/usr/dt/bin:/usr/openwin/demo/bin:/usr/local/X11R6.9.0/bin:/opt/SUNWspro/bin:/usr/ucb:/usr/local/netpbm/bin:/opt/sfw/bin
LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/usr/ccs/lib:/opt/sfw/lib:/usr/dt/lib:/usr/X11/lib:/usr/openwin/lib:/usr/local/X11R6.9.0/lib:/usr/ucblib:/opt/SUNWspro/lib:/opt/SUNWdtpcv/lib:/opt/SUNWits/Graphics-sw/xil/lib:/opt/SUNWits/Graphics-sw/xgl-3.0/lib
PATH=/usr/local/bin:$PATH
export PATH
LD_LIBRARY_PATH=/usr/local/bin:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
# make
if [ -x /usr/local/bin/gmake ]; then
MAKE="/usr/local/bin/gmake"
elif [ -x /opt/sfw/bin/gmake ]; then
MAKE="/opt/sfw/bin/gmake"
fi
# gzip
if [ -x /usr/bin/gzip ]; then
GZIP=/usr/bin/gzip
elif [ -x /usr/local/bin/gzip ]; then
GZIP=/usr/local/bin/gzip
fi
#
# basic tools and libraries
#
#
echo Basic Libraries
echo libtool-1.5.24:
echo Generic library support script
cd ${SROOT}; if [ ! -f libtool-1.5.24.tar.gz ]; then
wget ${SRCURL}/../gnu/libtool-1.5.24.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/libtool-1.5.24.tar.gz | tar -xvof -
cd /tmp; cd libtool-1.5.24; ./configure --enable-shared --enable-static
cd /tmp; cd libtool-1.5.24; ${MAKE} clean
cd /tmp; cd libtool-1.5.24; ${MAKE}
cd /tmp; cd libtool-1.5.24; ${MAKE} install
cd /tmp; rm -rf libtool-1.5.24
if [ -f /usr/local/bin/libtool ]; then
LIBTOOL=/usr/local/bin/libtool
export LIBTOOL
else
LIBTOOL=/opt/sfwl/bin/libtool
export LIBTOOL
fi
echo pcre-7.4.tar.gz
echo regular expression library
cd ${SROOT}; if [ ! -f pcre-7.4.tar.gz ]; then
wget ${SRCURL}/pcre-7.4.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/pcre-7.4.tar.gz | tar -xvof -
cd /tmp; cd pcre-7.4; ./configure --enable-shared --enable-static
cd /tmp; cd pcre-7.4; ${MAKE} clean
cd /tmp; cd pcre-7.4; ${MAKE}
cd /tmp; cd pcre-7.4; ${MAKE} install
cd /tmp; rm -rf pcre-7.4
echo libiconv-1.11:
echo libiconv converts from one character encoding to another through Unicode conversion
cd ${SROOT}; if [ ! -f libiconv-1.11.tar.gz ]; then
wget ${SRCURL}/../gnu/libiconv-1.11.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/libiconv-1.11.tar.gz | tar -xvof -
cd /tmp; cd libiconv-1.11; ./configure --enable-shared --enable-static
cd /tmp; cd libiconv-1.11; ${MAKE} clean
cd /tmp; cd libiconv-1.11; ${MAKE}
cd /tmp; cd libiconv-1.11; ${MAKE} install
cd /tmp; rm -rf libiconv-1.11
echo jpegsrc.v6b:
echo JPEG software
cd ${SROOT}; if [ ! -f jpeg-v6b.tar.gz ]; then
wget ${SRCURL}/jpeg-v6b.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/jpeg-v6b.tar.gz | tar -xvof -
cd /tmp; cd jpeg-6b; ./configure --enable-shared --enable-static CC='gcc'
cd /tmp; cd jpeg-6b; ${MAKE} clean
cd /tmp; cd jpeg-6b; ${MAKE}
cd /tmp; cd jpeg-6b; ${MAKE} test
cd /tmp; cd jpeg-6b; ${MAKE} install
cd /tmp; cd jpeg-6b; ${MAKE} install-lib
cd /tmp; rm -rf jpeg-6b
echo jasper-1.701.0:
cd ${SROOT}; if [ ! -f jasper-1.701.0.tar.gz ]; then
wget ${SRCURL}/jasper-1.701.0.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/jasper-1.701.0.tar.gz | tar -xvof -
cd /tmp; cd jasper-1.701.0; ./configure --enable-shared --enable-static CC='gcc'
cd /tmp; cd jasper-1.701.0; ${MAKE} clean
cd /tmp; cd jasper-1.701.0; ${MAKE}
cd /tmp; cd jasper-1.701.0; ${MAKE} install
cd /tmp; rm -rf jasper-1.701.0
echo zlib-1.2.3.tar.gz
echo zlib compression libraries
cd ${SROOT}; if [ ! -f zlib-1.2.3.tar.gz ]; then
wget ${SRCURL}/../zlib-1.2.3.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/zlib-1.2.3.tar.gz | tar -xvof -
cd /tmp; cd zlib-1.2.3; ./configure --shared
cd /tmp; cd zlib-1.2.3; ${MAKE} clean
cd /tmp; cd zlib-1.2.3; ${MAKE}
cd /tmp; cd zlib-1.2.3; ${MAKE} install
cd /tmp; rm -rf zlib-1.2.3
echo tiff-3.8.2:
echo libtiff provides support for the Tag Image File Format
cd ${SROOT}; if [ ! -f tiff-3.8.2.tar.gz ]; then
wget ${SRCURL}/tiff-3.8.2.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/tiff-3.8.2.tar.gz | tar -xvof -
cd /tmp; cd tiff-3.8.2; ./configure --enable-shared --enable-static
cd /tmp; cd tiff-3.8.2; ${MAKE} clean
cd /tmp; cd tiff-3.8.2; ${MAKE} -k CC="gcc -I. -I/usr/local/include"
cd /tmp; cd tiff-3.8.2; ${MAKE} -k install
cd /tmp; rm -rf tiff-3.8.2
echo libpng-1.2.23:
echo The PNG library is a collection of routines used to create and manipulate PNG format
cd ${SROOT}; if [ ! -f libpng-1.2.23.tar.gz ]; then
wget ${SRCURL}/libpng-1.2.23.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/libpng-1.2.23.tar.gz | tar -xvof -
# cd /tmp; cd libpng-1.2.23; cat ${SROOT}/libpng-1.2.23-patch-b.txt.gz | ${GZIP} -d | patch -p0
cd /tmp; cd libpng-1.2.23; cp scripts/makefile.solaris Makefile
cd /tmp; cd libpng-1.2.23; ${MAKE} clean
cd /tmp; cd libpng-1.2.23; ${MAKE}
cd /tmp; cd libpng-1.2.23; ${MAKE} test
cd /tmp; cd libpng-1.2.23; ${MAKE} install
cd /tmp; rm -rf libpng-1.2.23
echo libungif-4.1.4.tar.gz
echo GIF files library
cd ${SROOT}; if [ ! -f libungif-4.1.4.tar.gz ]; then
wget ${SRCURL}/libungif-4.1.4.tar.gz
fi
cd /tmp; $(GZIP) -d < ${SROOT}/libungif-4.1.4.tar.gz | tar -xvof -
cd /tmp; cd libungif-4.1.4; ./configure --enable-shared --enable-static
cd /tmp; cd libungif-4.1.4; ${MAKE} clean
cd /tmp; cd libungif-4.1.4; ${MAKE}
cd /tmp; cd libungif-4.1.4; ${MAKE} install
cd /tmp; rm -rf libungif-4.1.4
echo imlib-1.9.15:
cd ${SROOT}; if [ ! -f imlib-1.9.15.tar.gz ]; then
wget ${SRCURL}/imlib-1.9.15.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/imlib-1.9.15.tar.gz | tar -xvof -
cd /tmp; cd imlib-1.9.15; ./configure
cd /tmp; cd imlib-1.9.15; ${MAKE} clean
cd /tmp; cd imlib-1.9.15; ${MAKE}
cd /tmp; cd imlib-1.9.15; ${MAKE} install
cd /tmp; rm -rf imlib-1.9.15
# Tools
echo Tools
echo bzip2-1.0.2:
echo bzip2 file compression utility
cd ${SROOT}; if [ ! -f bzip2-1.0.2.tar.gz ]; then
wget ${SRCURL}/bzip2-1.0.2.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/bzip2-1.0.2.tar.gz | tar -xvof -
cd /tmp; cd bzip2-1.0.2; ${MAKE} clean
cd /tmp; cd bzip2-1.0.2; ${MAKE} CC=gcc
cd /tmp; cd bzip2-1.0.2; ${MAKE} install
echo tcsh-6.14.00:
cd ${SROOT}; if [ ! -f tcsh-6.14.00.tar.gz ]; then
wget ${SRCURL}/tcsh-6.14.00.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/tcsh-6.14.00.tar.gz | tar -xvof -
cd /tmp; cd tcsh-6.14.00; ./configure
cd /tmp; cd tcsh-6.14.00; ${MAKE} clean
cd /tmp; cd tcsh-6.14.00; ${MAKE}
cd /tmp; cd tcsh-6.14.00; ${MAKE} install
cd /tmp; rm -rf tcsh-6.14.00
echo perl-5.8.7:
echo perl
cd ${SROOT}; if [ ! -f perl-5.8.7.tar.gz ]; then
wget ${SRCURL}/perl-5.8.7.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/perl-5.8.7.tar.gz | tar -xvof -
cd /tmp; cd perl-5.8.7; ./Configure -Dcc=gcc -Dusethreads -ders
cd /tmp; cd perl-5.8.7; ${MAKE} clean
cd /tmp; cd perl-5.8.7; ${MAKE}
cd /tmp; cd perl-5.8.7; ${MAKE} test
cd /tmp; cd perl-5.8.7; ${MAKE} install
cd /tmp; rm -rf perl-5.8.7
echo ImageMagick-6.2.6-8:
# it requires
cd ${SROOT}; if [ ! -f ImageMagick-6.2.6-8.tar.bz2 ]; then
wget ${SRCURL}/ImageMagick-6.2.6-8.tar.bz2
fi
cd /tmp; bzip2 -d < ${SROOT}/ImageMagick-6.2.6-8.tar.bz2 | tar -xvof -
# --without-magick-plus-plus: It does not build Magick++ to prevent compilation error
cd /tmp; cd ImageMagick-6.2.6; ./configure --with-gcc --without-threads --without-jpeg --without-magick-plus-plus --enable-shared --enable-static CC='gcc' --with-perl-options="CC=gcc OPTIMIZE='-O' CCCDLFLAGS=''"
cd /tmp; cd ImageMagick-6.2.6; ${MAKE} clean
cd /tmp; cd ImageMagick-6.2.6; ${MAKE}
cd /tmp; cd ImageMagick-6.2.6; ${MAKE} install
cd /tmp; rm -rf ImageMagick-6.2.6
echo netpbm-10.26.11.tar.gz:
echo a package of graphic software
cd ${SROOT}; if [ ! -f netpbm-10.26.11.tar.gz ]; then
wget ${SRCURL}/netpbm-10.26.11.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/netpbm-10.26.11.tar.gz | tar -xvof -
cd /tmp; cd netpbm-10.26.11; ./configure
cd /tmp; cd netpbm-10.26.11; ${MAKE} clean
cd /tmp; cd netpbm-10.26.11; ${MAKE} JASPERLIB="-L/usr/local/lib -ljasper" JASPERHDR_DIR=/usr/local/include
cd /tmp; cd netpbm-10.26.11; ${MAKE} package
cd /tmp; cd netpbm-10.26.11; ./installnetpbm
cd /tmp; rm -rf netpbm-10.26.11
echo mlterm-2.9.2:
cd ${SROOT}; if [ ! -f mlterm-2.9.2.tar.gz ]; then
wget ${SRCURL}/mlterm-2.9.2.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/mlterm-2.9.2.tar.gz | tar -xvof -
cd /tmp; cd mlterm-2.9.2; ./configure --enable-shared --enable-static
cd /tmp; cd mlterm-2.9.2; ${MAKE}
cd /tmp; cd mlterm-2.9.2; ${MAKE} install
cd /tmp; cd mlterm-2.9.2; ${MAKE} install.man
cd /tmp; rm -rf mlterm-2.9.2
echo done
GNU emacs もインストールしますが、GNU emacs の設定(Ctrl+\ で日本語入力)については、「SUN Solaris 8/9/10 各種設定」の Web ページ を見て下さい。
# スーパーユーザになって、make とインストール su unsetenv CC unsetenv CFLAGS
古いバージョンのソースコードが必要になることがあるので、 消さずに置いている。
ここにあるGNU ソフトのソースファイルを一括してダウンロードする方法は次 の通りです。
/usr/local/bin/wget -N -nd -np -r --follow-tags=a https://www.kkaneko.jp/tools/src/gnu/
#!/bin/sh
# Use SUN C/C++ compiler
# CC=/opt/SUNWspro/bin/cc
# export CC
# CXX=/opt/SUNWspro/bin/cc
# export CXX
prefix=/usr/local
export prefix
SROOT=/tmp
SRCURL="https://www.kkaneko.jp/tools/src/"
PATH=/usr/bin:/usr/sbin:/sbin:/usr/local/SUNWspro/bin:/usr/local/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/openwin/demo/bin:/usr/local/X11R6.9.0/bin:/opt/SUNWspro/bin:/usr/ucb:/usr/local/netpbm/bin:/opt/sfw/bin
export PATH
LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/usr/ccs/lib:/opt/sfw/lib:/usr/dt/lib:/usr/openwin/lib:/usr/local/X11R6.9.0/lib:/usr/ucblib:/opt/SUNWspro/lib:/opt/SUNWdtpcv/lib:/opt/SUNWits/Graphics-sw/xil/lib:/opt/SUNWits/Graphics-sw/xgl-3.0/lib
export LD_LIBRARY_PATH
MAKE=/usr/local/bin/gmake
GMAKE=/usr/local/bin/gmake
#
#
#
# Basic Tools
echo gzip-1.2.4a:
cd /tmp; gzip -d < ${SROOT}/gzip-1.2.4a.tar.gz | tar -xvof -
cd /tmp; cd gzip-1.2.4a; ./configure
cd /tmp; cd gzip-1.2.4a; ${MAKE} clean
cd /tmp; cd gzip-1.2.4a; ${MAKE}
cd /tmp; cd gzip-1.2.4a; ${MAKE} install
cd /tmp; rm -rf /tmp/gzip-1.2.4a
echo tar-1.18:
cd /tmp; gzip -d < ${SROOT}/tar-1.18.tar.gz | tar -xvof -
cd /tmp; cd tar-1.18; ./configure
cd /tmp; cd tar-1.18; ${MAKE} clean
cd /tmp; cd tar-1.18; ${MAKE}
cd /tmp; cd tar-1.18; ${MAKE} install
mv /usr/local/bin/tar /usr/local/bin/gtar
cd /tmp; rm -rf /tmp/tar-1.18
echo make-3.81:
cd /tmp; gzip -d < ${SROOT}/make-3.81.tar.gz | tar -xvof -
cd /tmp; cd make-3.81; ./configure --prefix=/usr/local
cd /tmp; cd make-3.81; ${MAKE} clean
cd /tmp; cd make-3.81; ${MAKE}
cd /tmp; cd make-3.81; ${MAKE} install
mv /usr/local/bin/make /usr/local/bin/gmake
cd /tmp; rm -rf /tmp/make-3.81
#
# Libraries
#
echo commoncpp2-1.3.8
cd /tmp; gzip -d < ${SROOT}/commoncpp2-1.3.8.tar.gz | tar -xvof -
cd /tmp/commoncpp2-1.3.8; ./configure
cd /tmp/commoncpp2-1.3.8; ${MAKE} clean
cd /tmp/commoncpp2-1.3.8; ${MAKE}
cd /tmp/commoncpp2-1.3.8; ${MAKE} install
echo gettext-0.14.4
cd /tmp; gzip -d < ${SROOT}/gettext-0.14.4.tar.gz | tar -xvof -
cd /tmp/gettext-0.14.4; ./configure
cd /tmp/gettext-0.14.4; ${MAKE} clean
cd /tmp/gettext-0.14.4; ${MAKE}
cd /tmp/gettext-0.14.4; ${MAKE} install
echo gdbm-1.8.3:
echo A set of database routines that use extensible hashing. The routines work like the UNIX dbm routine
cd /tmp; gzip -d < ${SROOT}/gdbm-1.8.3.tar.gz | tar -xvof -
cd /tmp; cd gdbm-1.8.3; ./configure
cd /tmp; cd gdbm-1.8.3; ${MAKE} clean
cd /tmp; cd gdbm-1.8.3; ${MAKE}
cd /tmp; cd gdbm-1.8.3; ${MAKE} install
cd /tmp; rm -rf /tmp/gdbm-1.8.3
echo libiconv-1.11:
echo libiconv converts from one character encoding to another through Unicode conversion
cd ${SROOT}; if [ ! -f libiconv-1.11.tar.gz ]; then
wget ${SRCURL}/gnu/libiconv-1.11.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/libiconv-1.11.tar.gz | tar -xvof -
cd /tmp; cd libiconv-1.11; ./configure --enable-shared --enable-static
cd /tmp; cd libiconv-1.11; ${MAKE} clean
cd /tmp; cd libiconv-1.11; ${MAKE}
cd /tmp; cd libiconv-1.11; ${MAKE} install
cd /tmp; rm -rf libiconv-1.11
echo libmatheval
cd /tmp; gzip -d < ${SROOT}/libmatheval-1.1.1.tar.gz | tar -xvof -
cd /tmp/libmatheval-1.1.1; ./configure
cd /tmp/libmatheval-1.1.1; ${MAKE} clean
cd /tmp/libmatheval-1.1.1; ${MAKE}
cd /tmp/libmatheval-1.1.1; ${MAKE} install
echo libsigsegv
echo GNU libsigsegv is a library for handling page faults
cd /tmp; gzip -d < ${SROOT}/libsigsegv-2.1.tar.gz | tar -xvof -
cd /tmp/libsigsegv-2.1; ./configure
cd /tmp/libsigsegv-2.1; ${MAKE} clean
cd /tmp/libsigsegv-2.1; ${MAKE}
cd /tmp/libsigsegv-2.1; ${MAKE} install
echo libxmi
cd /tmp; gzip -d < ${SROOT}/libxmi-1.2.tar.gz | tar -xvof -
cd /tmp/libxmi-1.2; ./configure
cd /tmp/libxmi-1.2; ${MAKE} clean
cd /tmp/libxmi-1.2; ${MAKE}
cd /tmp/libxmi-1.2; ${MAKE} install
echo ncurses-5.4.tar.gz
echo GNU curses library is a freeware emulation of System V Release 4.0 curses
cd ${SROOT}; if [ ! -f ncurses-5.4.tar.gz ]; then
wget ${SRCURL}/gnu/ncurses-5.4.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/ncurses-5.4.tar.gz | tar -xvof -
cd /tmp; cd ncurses-5.4; ./configure
cd /tmp; cd ncurses-5.4; ${MAKE} clean
cd /tmp; cd ncurses-5.4; ${MAKE}
cd /tmp; cd ncurses-5.4; ${MAKE} install
cd /tmp; rm -rf ncurses-5.4
echo readline-5.2:
echo GNU library for editing command lines
cd /tmp; gzip -d < ${SROOT}/readline-5.2.tar.gz | tar -xvof -
cd /tmp; cd readline-5.2; ./configure
cd /tmp; cd readline-5.2; ${MAKE} clean
cd /tmp; cd readline-5.2; ${MAKE}
cd /tmp; cd readline-5.2; ${MAKE} install
cd /tmp; rm -rf /tmp/readline-5.2
#
# Tools and Utilities
#
echo a2ps-4.13b:
echo a2ps is an Any to PostScript filter. It requires psutils
# cd ${SROOT}; if [ ! -f a2ps-4.13b.tar.gz ]; then
# wget ${SRCURL}/gnu/a2ps-4.13b.tar.gz
# fi
cd /tmp; gzip -d < ${SROOT}/a2ps-4.13b.tar.gz | tar -xvof -
cd /tmp/a2ps-4.13; ./configure
cd /tmp/a2ps-4.13; ${MAKE} clean
cd /tmp/a2ps-4.13; ${MAKE}
cd /tmp/a2ps-4.13; ${MAKE} install
cd /tmp; rm -rf a2ps-4.13
echo aspell
cd /tmp; gzip -d < ${SROOT}/aspell-0.60.2.tar.gz | tar -xvof -
cd /tmp/aspell-0.60.2; ./configure
cd /tmp/aspell-0.60.2; ${MAKE} clean
cd /tmp/aspell-0.60.2; ${MAKE}
cd /tmp/aspell-0.60.2; ${MAKE} install
echo autoconf-2.61:
echo Extensible package of m4 macros that produce portable shell scripts to automatically configure software source code packages
cd /tmp; gzip -d < ${SROOT}/autoconf-2.61.tar.gz | tar -xvof -
cd /tmp; cd autoconf-2.61; ./configure
cd /tmp; cd autoconf-2.61; ${MAKE} clean
cd /tmp; cd autoconf-2.61; ${MAKE}
cd /tmp; cd autoconf-2.61; ${MAKE} install
cd /tmp; rm -rf /tmp/autoconf-2.61
echo automake-1.10:
echo 'Automake' automatically generates make files compliant with the GNU coding standards
cd /tmp; gzip -d < ${SROOT}/automake-1.10.tar.gz | tar -xvof -
cd /tmp; cd automake-1.10; ./configure
cd /tmp; cd automake-1.10; ${MAKE} clean
cd /tmp; cd automake-1.10; ${MAKE}
cd /tmp; cd automake-1.10; ${MAKE} install
cd /tmp; rm -rf /tmp/automake-1.10
echo bash-3.2:
echo Bash is an sh-compatible shell that incorporates useful features from the Korn shell and C shell.
cd /tmp; gzip -d < ${SROOT}/bash-3.2.tar.gz | tar -xvof -
cd /tmp/bash-3.2; ./configure
cd /tmp/bash-3.2; ${MAKE} clean
cd /tmp/bash-3.2; ${MAKE}
cd /tmp/bash-3.2; ${MAKE} install
echo binutils-2.16.1:
cd /tmp; gzip -d < ${SROOT}/binutils-2.16.1.tar.gz | tar -xvof -
rm -f /usr/local/bin/ar /usr/local/bin/sparc*-sun-solaris*-ar
rm -f /usr/local/bin/ranlib /usr/local/bin/sparc*-sun-solaris*-ranlib
rm -f /usr/local/bin/nm /usr/local/bin/sparc*-sun-solaris*-nm
rm -f /usr/local/bin/ar /usr/local/bin/i?86*-sun-solaris*-ar
rm -f /usr/local/bin/ranlib /usr/local/bin/i?86*-sun-solaris*-ranlib
rm -f /usr/local/bin/nm /usr/local/bin/i?86*-sun-solaris*-nm
cd /tmp; cd binutils-2.16.1; mkdir build
cd /tmp; cd binutils-2.16.1; cd build; ./configure --prefix=/usr/local --enable-shared --enable-nls
cd /tmp; cd binutils-2.16.1; cd build; ${MAKE} clean
cd /tmp; cd binutils-2.16.1; cd build; ${MAKE}
cd /tmp; cd binutils-2.16.1; cd build; ${MAKE} install
cd /tmp; rm -rf /tmp/binutils-2.16.1
echo cvs-1.11.20:
echo Version control system and important component of Source Configuration Management
cd /tmp; gzip -d < ${SROOT}/cvs-1.11.20.tar.gz | tar -xvof -
cd /tmp; cd cvs-1.11.20; ./configure
cd /tmp; cd cvs-1.11.20; ${MAKE} clean
cd /tmp; cd cvs-1.11.20; ${MAKE}
cd /tmp; cd cvs-1.11.20; ${MAKE} install
cd /tmp; rm -rf /tmp/cvs-1.11.20
echo ddd-3.3.10:
echo Graphical front end for command line debuggers
cd /tmp; gzip -d < ${SROOT}/ddd-3.3.10.tar.gz | tar -xvof -
cd /tmp; cd ddd-3.3.10; ./configure
cd /tmp; cd ddd-3.3.10; ${MAKE} clean
cd /tmp; cd ddd-3.3.10; ${MAKE}
cd /tmp; cd ddd-3.3.10; ${MAKE} install
cd /tmp; rm -rf /tmp/ddd-3.3.10
echo diction-1.02:
echo Checks text for readability and bad usage
cd /tmp; gzip -d < ${SROOT}/diction-1.02.tar.gz | tar -xvof -
cd /tmp/diction-1.02; ./configure
cd /tmp/diction-1.02; ${MAKE} clean
cd /tmp/diction-1.02; ${MAKE}
cd /tmp/diction-1.02; ${MAKE} install
echo coreutils-5.93:
echo Combination of filutils, shellutils and textutils packages into a single release
cd /tmp; gtar -xvzof ${SROOT}/coreutils-5.93.tar.gz
cd /tmp/coreutils-5.93; ./configure
cd /tmp/coreutils-5.93; ${MAKE} clean
cd /tmp/coreutils-5.93; ${MAKE}
cd /tmp/coreutils-5.93; ${MAKE} install
echo fileutils-4.1:
echo Included tools duplicate files, list files, display disk usage, change file permissions, change group and owner ownership, rename, delete and creates file nodes including technology to delete files securely
cd /tmp; gzip -d < ${SROOT}/fileutils-4.1.tar.gz | tar -xvof -
cd /tmp; cd fileutils-4.1; ./configure
cd /tmp; cd fileutils-4.1; ${MAKE} clean
cd /tmp; cd fileutils-4.1; ${MAKE}
cd /tmp; cd fileutils-4.1; ${MAKE} install
cd /tmp; rm -rf /tmp/fileutils-4.1
echo textutils-2.1:
cd /tmp; gzip -d < ${SROOT}/textutils-2.1.tar.gz | tar -xvof -
cd /tmp; cd textutils-2.1; ./configure
cd /tmp; cd textutils-2.1; ${MAKE} clean
cd /tmp; cd textutils-2.1; ${MAKE}
cd /tmp; cd textutils-2.1; ${MAKE} install
cd /tmp; rm -rf /tmp/textutils-2.1
echo findutils-4.2.20:
cd /tmp; gzip -d < ${SROOT}/findutils-4.2.20.tar.gz | tar -xvof -
cd /tmp; cd findutils-4.2.20; ./configure
cd /tmp; cd findutils-4.2.20; ${MAKE} clean
cd /tmp; cd findutils-4.2.20; ${MAKE}
cd /tmp; cd findutils-4.2.20; ${MAKE} install
cd /usr/local/bin; nice updatedb &
cd /tmp; rm -rf /tmp/findutils-4.2.20
echo fontutils-0.7:
echo Converts between font formats and creates fonts
cd /tmp; gzip -d < ${SROOT}/fontutils-0.7.tar.gz | tar -xvof -
cd /tmp; cd fontutils-0.7; ./configure
cd /tmp; cd fontutils-0.7; ${MAKE} clean
cd /tmp; cd fontutils-0.7; ${MAKE}
cd /tmp; cd fontutils-0.7; ${MAKE} install
cd /tmp; rm -rf /tmp/fontutils-0.7
echo gawk-3.1.4:
echo String manipulation language
cd /tmp; gzip -d < ${SROOT}/gawk-3.1.4.tar.gz | tar -xvof -
cd /tmp; cd gawk-3.1.4; CC=gcc ./configure
cd /tmp; cd gawk-3.1.4; ${MAKE} clean
cd /tmp; cd gawk-3.1.4; ${MAKE}
cd /tmp; cd gawk-3.1.4; ${MAKE} install
cd /tmp; rm -rf /tmp/gawk-3.1.4
echo gcal-3.01:
echo GNU calendar
cd /tmp; gzip -d < ${SROOT}/gcal-3.01.tar.gz | tar -xvof -
cd /tmp; cd gcal-3.01; ./configure
cd /tmp; cd gcal-3.01; ${MAKE} clean
cd /tmp; cd gcal-3.01; ${MAKE}
cd /tmp; cd gcal-3.01; ${MAKE} install
cd /tmp; rm -rf /tmp/gcal-3.01
echo gdb-6.6:
echo GNU debugger
cd /tmp; gzip -d < ${SROOT}/gdb-6.6.tar.gz | tar -xvof -
cd /tmp; cd gdb-6.6; ./configure
cd /tmp; cd gdb-6.6; ${MAKE} clean
cd /tmp; cd gdb-6.6; ${MAKE}
cd /tmp; cd gdb-6.6; cd gdb; ${MAKE} CFLAGS="-lintl"
cd /tmp; cd gdb-6.6; ${MAKE} install
cd /tmp; rm -rf /tmp/gdb-6.6
echo gift-0.1.9:
echo Content based image retrieval system
cd /tmp; /usr/bin/bzip2 -d < ${SROOT}/gift-0.11.8.1.tar.bz2 | /usr/bin/tar -xvof -
cd /tmp/gift-0.11.8.1; ./configure
cd /tmp/gift-0.11.8.1; ${MAKE} clean
cd /tmp/gift-0.11.8.1; ${MAKE}
cd /tmp/gift-0.11.8.1; ${MAKE} install
echo git-4.3.20:
echo A set of interactive tools that includes an extensible file system browser, an ASCII/hex file viewer, a process viewer/killer, and other related utilities and shell scripts.
cd /tmp; gzip -d < ${SROOT}/git-4.3.20.tar.gz | tar -xvof -
cd /tmp/git-4.3.20; ./configure
cd /tmp/git-4.3.20; ${MAKE} clean
cd /tmp/git-4.3.20; ${MAKE}
cd /tmp/git-4.3.20; ${MAKE} install
echo gleem-1.2.1:
echo OpenGL Extremely-Easy-to-use Manipulators is a small, self-contained C++ lib of 3D widgets that support direct user interaction with a 3D scene
cd /tmp; gzip -d < ${SROOT}/gleem-1.2.1.tar.gz | tar -xvof -
cd /tmp/gleem-1.2.1; ./configure
cd /tmp/gleem-1.2.1; ${MAKE} clean
cd /tmp/gleem-1.2.1; ${MAKE}
cd /tmp/gleem-1.2.1; ${MAKE} install
echo global-4.8.2:
echo Source code tag system for C, C++, Java, and Yacc
cd /tmp; gzip -d < ${SROOT}/global-4.8.2.tar.gz | tar -xvof -
cd /tmp/global-4.8.2; ./configure
cd /tmp/global-4.8.2; ${MAKE} clean
cd /tmp/global-4.8.2; ${MAKE}
cd /tmp/global-4.8.2; ${MAKE} install
echo glpk-4.8:
echo GNU Linear Programming Kit is intended for solving large scale linear programming problems by means of the revised simplex method
cd /tmp; gzip -d < ${SROOT}/glpk-4.8.tar.gz | tar -xvof -
cd /tmp/glpk-4.8; ./configure
cd /tmp/glpk-4.8; ${MAKE} clean
cd /tmp/glpk-4.8; ${MAKE}
cd /tmp/glpk-4.8; ${MAKE} install
echo goose-0.0.11:
echo Goose is a C++ library for statistical computation
cd /tmp; gzip -d < ${SROOT}/goose-0.0.11.tar.gz | tar -xvof -
cd /tmp/goose-0.0.11; ./configure
cd /tmp/goose-0.0.11; ${MAKE} clean
cd /tmp/goose-0.0.11; ${MAKE}
cd /tmp/goose-0.0.11; ${MAKE} install
echo gperf-3.0.1:
echo GNU gperf is a perfect hash function generator
cd /tmp; gzip -d < ${SROOT}/gperf-3.0.1.tar.gz | tar -xvof -
cd /tmp/gperf-3.0.1; ./configure
cd /tmp/gperf-3.0.1; ${MAKE} clean
cd /tmp/gperf-3.0.1; ${MAKE}
cd /tmp/gperf-3.0.1; ${MAKE} install
echo grep-2.5.1a:
echo Finds lines that match entered patterns
cd /tmp; gzip -d < ${SROOT}/grep-2.5.1a.tar.gz | tar -xvof -
cd /tmp; cd grep-2.5.1a; ./configure
cd /tmp; cd grep-2.5.1a; ${MAKE} clean
cd /tmp; cd grep-2.5.1a; ${MAKE}
cd /tmp; cd grep-2.5.1a; ${MAKE} install
cd /tmp; rm -rf /tmp/grep-2.5.1a
echo groff-1.19.1:
echo Document formatting system
cd /tmp; gzip -d < ${SROOT}/groff-1.19.1.tar.gz | tar -xvof -
cd /tmp; cd groff-1.19.1; ./configure
cd /tmp; cd groff-1.19.1; ${MAKE} clean
cd /tmp; cd groff-1.19.1; ${MAKE}
cd /tmp; cd groff-1.19.1; ${MAKE} install
cd /tmp; rm -rf /tmp/groff-1.19.1
echo indent-2.2.9:
echo 'indent' changes the appearance of a C program by inserting or deleting whitespace
cd /tmp; gzip -d < ${SROOT}/indent-2.2.9.tar.gz | tar -xvof -
cd /tmp/indent-2.2.9; ./configure
cd /tmp/indent-2.2.9; ${MAKE} clean
cd /tmp/indent-2.2.9; ${MAKE}
cd /tmp/indent-2.2.9; ${MAKE} install
echo intlfonts-1.2.1:
echo This directory contains free X11 fonts BDF format for all characters that Emacs 20 can handle
cd /tmp; gzip -d < ${SROOT}/intlfonts-1.2.1.tar.gz | tar -xvof -
cd /tmp/intlfonts-1.2.1; ./configure
cd /tmp/intlfonts-1.2.1; ${MAKE} clean
cd /tmp/intlfonts-1.2.1; ${MAKE}
cd /tmp/intlfonts-1.2.1; ${MAKE} install
echo ispell-3.2.06:
echo Interactive spell checker that suggests near misses to replace unrecognized words
cd /tmp; gzip -d < ${SROOT}/ispell-3.2.06.tar.gz | tar -xvof -
cd /tmp/ispell-3.2.06; ./configure
cd /tmp/ispell-3.2.06; ${MAKE} clean
cd /tmp/ispell-3.2.06; ${MAKE}
cd /tmp/ispell-3.2.06; ${MAKE} install
echo libtool-1.5.24:
echo Generic library support script
cd /tmp; gzip -d < ${SROOT}/libtool-1.5.24.tar.gz | tar -xvof -
cd /tmp; cd libtool-1.5.24; ./configure
cd /tmp; cd libtool-1.5.24; ${MAKE} clean
cd /tmp; cd libtool-1.5.24; ${MAKE}
cd /tmp; cd libtool-1.5.24; ${MAKE} install
cd /tmp; rm -rf /tmp/libtool-1.5.24
echo miscfiles
echo Collection of various files
cd /tmp; gzip -d < ${SROOT}/miscfiles-1.4.2.tar.gz | tar -xvof -
cd /tmp/miscfiles-1.4.2; ./configure
cd /tmp/miscfiles-1.4.2; ${MAKE} clean
cd /tmp/miscfiles-1.4.2; ${MAKE}
cd /tmp/miscfiles-1.4.2; ${MAKE} install
echo patch-2.5.4:
echo GNU version of Larry Wall's program that takes diff's output and applies it to an original file to generate a modified version of that file
cd /tmp; gzip -d < ${SROOT}/patch-2.5.4.tar.gz | tar -xvof -
cd /tmp; cd patch-2.5.4; ./configure
cd /tmp; cd patch-2.5.4; ${MAKE} clean
cd /tmp; cd patch-2.5.4; ${MAKE}
cd /tmp; cd patch-2.5.4; ${MAKE} install
cd /tmp; rm -rf /tmp/patch-2.5.4
echo rcs-5.7:
echo Version control and project management software
cd /tmp; gzip -d < ${SROOT}/rcs-5.7.tar.gz | tar -xvof -
cd /tmp; cd rcs-5.7; ./configure
cd /tmp; cd rcs-5.7; ${MAKE} clean
cd /tmp; cd rcs-5.7; ${MAKE}
cd /tmp; cd rcs-5.7; ${MAKE} install
cd /tmp; rm -rf /tmp/rcs-5.7
echo sed-4.1.4:
echo A stream-oriented non-interactive text editor
cd /tmp; gzip -d < ${SROOT}/sed-4.1.4.tar.gz | tar -xvof -
cd /tmp; cd sed-4.1.4; ./configure
cd /tmp; cd sed-4.1.4; ${MAKE} clean
cd /tmp; cd sed-4.1.4; ${MAKE}
cd /tmp; cd sed-4.1.4; ${MAKE} install
cd /tmp; rm -rf /tmp/sed-4.1.4
echo sharutils-4.3.81:
echo Sharutils consists of two shell archiving utilities: shar and unshar.
cd /tmp; gzip -d < ${SROOT}/sharutils-4.3.81.tar.gz | tar -xvof -
cd /tmp/sharutils-4.3.81; ./configure
cd /tmp/sharutils-4.3.81; ${MAKE} clean
cd /tmp/sharutils-4.3.81; ${MAKE}
cd /tmp/sharutils-4.3.81; ${MAKE} install
echo shtool-2.0.2:
echo A compilation of portable shell scripts into a single shell tool
cd /tmp; gzip -d < ${SROOT}/shtool-2.0.2.tar.gz | tar -xvof -
cd /tmp/shtool-2.0.2; ./configure
cd /tmp/shtool-2.0.2; ${MAKE} clean
cd /tmp/shtool-2.0.2; ${MAKE}
cd /tmp/shtool-2.0.2; ${MAKE} install
echo spell-1.0:
echo spell checking program which prints each misspelled word on a line of its own
cd /tmp; gzip -d < ${SROOT}/spell-1.0.tar.gz | tar -xvof -
cd /tmp/spell-1.0; ./configure
cd /tmp/spell-1.0; ${MAKE} clean
cd /tmp/spell-1.0; ${MAKE}
cd /tmp/spell-1.0; ${MAKE} install
echo termcap-1.3.1:
cd /tmp; gzip -d < ${SROOT}/termcap-1.3.1.tar.gz | tar -xvof -
cd /tmp; cd termcap-1.3.1; ./configure
cd /tmp; cd termcap-1.3.1; ${MAKE} clean
cd /tmp; cd termcap-1.3.1; ${MAKE}
cd /tmp; cd termcap-1.3.1; ${MAKE} install
cd /tmp; rm -rf /tmp/termcap-1.3.1
echo termutils-2.0:
echo Programs for controlling terminals
cd /tmp; gzip -d < ${SROOT}/termutils-2.0.tar.gz | tar -xvof -
cd /tmp/termutils-2.0; ./configure
cd /tmp/termutils-2.0; ${MAKE} clean
cd /tmp/termutils-2.0; ${MAKE}
cd /tmp/termutils-2.0; ${MAKE} install
echo texinfo-4.8a:
echo Produces manuals, ASCII text, and on-line documentation
cd /tmp; gzip -d < ${SROOT}/texinfo-4.8a.tar.gz | tar -xvof -
cd /tmp; cd texinfo-4.8a; ./configure
cd /tmp; cd texinfo-4.8a; ${MAKE} clean
cd /tmp; cd texinfo-4.8a; ${MAKE}
cd /tmp; cd texinfo-4.8a; ${MAKE} install
cd /tmp; rm -rf /tmp/texinfo-4.8a
echo time-1.7:
echo Reports the user, system, and real time used by a process
cd /tmp; gzip -d < ${SROOT}/time-1.7.tar.gz | tar -xvof -
cd /tmp/time-1.7; ./configure
cd /tmp/time-1.7; ${MAKE} clean
cd /tmp/time-1.7; ${MAKE}
cd /tmp/time-1.7; ${MAKE} install
echo wdiff-0.5:
echo Compares two files on a word per word basis, finding the word deleted or added from the first file to make the second
cd /tmp; gzip -d < ${SROOT}/wdiff-0.5.tar.gz | tar -xvof -
cd /tmp/wdiff-0.5; ./configure
cd /tmp/wdiff-0.5; ${MAKE} clean
cd /tmp/wdiff-0.5; ${MAKE}
cd /tmp/wdiff-0.5; ${MAKE} install
echo wget-1.10.2:
cd /tmp; gzip -d < ${SROOT}/wget-1.10.2.tar.gz | tar -xvof -
cd /tmp; cd wget-1.10.2
cd /tmp; cd wget-1.10.2; ./configure
cd /tmp; cd wget-1.10.2; ${MAKE} clean
cd /tmp; cd wget-1.10.2; ${MAKE}
cd /tmp; cd wget-1.10.2; ${MAKE} install
#
# GNU C compiler
#
echo flex-2.5.33:
cd /tmp; gzip -d < ${SROOT}/flex-2.5.33.tar.gz | tar -xvof -
cd /tmp; cd flex-2.5.33; ./configure
cd /tmp; cd flex-2.5.33; ${MAKE} clean
cd /tmp; cd flex-2.5.33; ${MAKE}
cd /tmp; cd flex-2.5.33; ${MAKE} install
cd /tmp; rm -rf /tmp/flex-2.5.33
echo bison-2.0:
cd /tmp; gzip -d < ${SROOT}/bison-2.0.tar.gz | tar -xvof -
cd /tmp; cd bison-2.0; ./configure
cd /tmp; cd bison-2.0; ${MAKE} clean
cd /tmp; cd bison-2.0; ${MAKE}
cd /tmp; cd bison-2.0; ${MAKE} install
cd /tmp; rm -rf /tmp/bison-2.0
echo m4-1.4.8:
cd /tmp; gzip -d < ${SROOT}/m4-1.4.8.tar.gz | tar -xvof -
cd /tmp; cd m4-1.4.8; ./configure
cd /tmp; cd m4-1.4.8; ${MAKE} clean
cd /tmp; cd m4-1.4.8; ${MAKE}
cd /tmp; cd m4-1.4.8; ${MAKE} install
cd /tmp; rm -rf /tmp/m4-1.4.8
echo plotutils
echo Plotting and graphics utilities
cd /tmp; gzip -d < ${SROOT}/plotutils-2.4.1.tar.gz | tar -xvof -
cd /tmp/plotutils-2.4.1; ./configure
cd /tmp/plotutils-2.4.1; ${MAKE} clean
cd /tmp/plotutils-2.4.1; ${MAKE}
cd /tmp/plotutils-2.4.1; ${MAKE} install
#
# Try to install three versions of gcc: 3.4.5 -> 2.95.3 -> 3.3.6 -> 4.0 beta -> 3.4.6
#
echo gcc-core-3.4.5
cd /tmp; if [ ! -f gcc-core-3.4.5.tar.gz ]; then
wget ${SRCURL}/gnu/gcc-core-3.4.5.tar.gz
fi
cd /tmp; rm -rf gcc-3.4.5
cd /tmp; gzip -d < gcc-core-3.4.5.tar.gz | tar -xvof -
cd /tmp; cd gcc-3.4.5; mkdir buiid
cd /tmp; cd gcc-3.4.5; cd buiid; ../configure --with-gnu-as --with-ld=/usr/ccs/bin/ld --enable-nls --enable-shared
# cd /tmp; cd gcc-3.4.5; cd buiid; ../configure --with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld --disable-nls --disable-shared
# cd /tmp; cd gcc-3.4.5; cd build; ../configure --prefix=/usr/local --with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld --disable-nls --disable-libgcj --enable-languages=c,c++
cd /tmp; cd gcc-3.4.5; cd buiid; ${GMAKE} bootstrap
cd /tmp; cd gcc-3.4.5; cd buiid; ${GMAKE} install
cd /tmp; rm -rf gcc-3.4.5
echo gcc-2.95.3:
# avoid GNU ld
cd /tmp; rm -rf /tmp/gcc-2.95.3
cd /tmp; gzip -d < gcc-2.95.3.tar.gz | tar -xvof -
# It seems that 'sparcv9-sun-solaris' option does not work correctly.
# `echo | sed 's/v9//g'` means that 64 bit compiler is not built.
cd /tmp; cd gcc-2.95.3; ./configure --prefix=/usr/local --enable-languages="c,c++"
cd /tmp; cd gcc-2.95.3; ${MAKE} clean
# building native compiler
cd /tmp; cd gcc-2.95.3/texinfo; ${MAKE}
cd /tmp; cd gcc-2.95.3/texinfo/makeinfo; ${MAKE} LIBS="-lintl"
cd /tmp; cd gcc-2.95.3; ${MAKE} bootstrap
cd /tmp; cd gcc-2.95.3; ${MAKE} install
cd /tmp; rm -rf gcc-2.95.3
echo gcc-3.3.6
cd /tmp; if [ ! -f gcc-3.3.6.tar.gz ]; then
wget ${SRCURL}/gnu/gcc-3.3.6.tar.gz
fi
cd /tmp; rm -rf gcc-3.3.6
cd /tmp; gzip -d < gcc-3.3.6.tar.gz | tar -xvof -
cd /tmp; cd gcc-3.3.6; mkdir build
cd /tmp; cd gcc-3.3.6; cd build; ../configure --with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld --enable-nls --enable-shared
cd /tmp; cd gcc-3.3.6; cd build; ${MAKE} bootstrap
cd /tmp; cd gcc-3.3.6; cd build; ${MAKE} install
cd /tmp; rm -rf gcc-3.3.6
echo gcc-4.0.3
cd /tmp
if [ ! -f gcc-4.0.3.tar.bz2 ]; then
wget https://www.kkaneko.jp/tools/src/gnu/gcc-4.0.3.tar.bz2
fi
# extract source file
cd /tmp
rm -rf gcc-4.0.3
/usr/bin/bzip2 -d < gcc-4.0.3.tar.bz2 | /usr/bin/tar -xvof -
# configure, make, and install
cd /tmp/gcc-4.0.3
mkdir build
cd build
../configure --with-gnu-as --with-ld=/usr/ccs/bin/ld --enable-nls --enable-shared
/usr/local/bin/gmake bootstrap
/usr/local/bin/gmake install
/usr/local/bin/gmake clean
# download source file
echo gcc-3.4.6
cd /tmp
if [ ! -f gcc-3.4.6.tar.gz ]; then
wget https://www.kkaneko.jp/tools/src/gnu/gcc-3.4.6.tar.gz
fi
# extract source file
cd /tmp
rm -rf gcc-3.4.6
/usr/bin/gzip -d < gcc-3.4.6.tar.gz | /usr/bin/tar -xvof -
# configure, make, and install
cd /tmp/gcc-3.4.6
mkdir build
cd build
../configure --with-gnu-as --with-ld=/usr/ccs/bin/ld --enable-nls --enable-shared
# ../configure --with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld --disable-nls --enable-shared
/usr/local/bin/gmake bootstrap
/usr/local/bin/gmake install
/usr/local/bin/gmake clean
echo emacs-21.4a
cd /tmp; if [ ! -f emacs-21.4a.tar.gz ]; then
wget ${SRCURL}/gnu/emacs-21.4a.tar.gz
fi
cd /tmp; if [ ! -f leim-21.4.tar.gz ]; then
wget ${SRCURL}/gnu/leim-21.4.tar.gz
fi
cd /tmp; rm -rf emacs-21.4
cd /tmp; gzip -d < emacs-21.4a.tar.gz | tar -xvof -
cd /tmp; gzip -d < leim-21.4.tar.gz | tar -xvof -
cd /tmp/emacs-21.4
./configure -with-gcc --with-mule --with-xim --with-xll --with-site-lisp --with-xfs --with-x-toolkit=motif --with-wnn --with-wnn-includes=/usr/lib/locale/ja/wnn/demo/include --with-wnn-libraries=/usr/lib/locale/ja/wnn/lib
# ./configure --prefix=/usr/local -with-gcc --with-mule --with-xim --with-xll --x-libraries=/usr/openwin/lib:/usr/local/lib:/usr/sfw/lib:/opt/sfw/lib --x-includes=/usr/openwin/include:/usr/local/include:/usr/sfw/include:/opt/sfw/include --with-site-lisp --with-xfs --with-x-toolkit=motif --with-wnn --with-wnn-includes=/usr/lib/locale/ja/wnn/demo/include --with-wnn-libraries=/usr/lib/locale/ja/wnn/lib
# cd /tmp/emacs-21.4; ./configure --prefix=/usr/local \
# -with-gcc --with-mule --with-xim \
# --x-libraries=/usr/X11/lib:/usr/openwin/lib:/usr/local/lib:/usr/sfw/lib:/opt/sfw/lib \
# --x-includes=/usr/X11/include:/usr/openwin/include:/usr/local/include:/usr/sfw/include:/opt/sfw/include \
# --with-site-lisp --with-xfs --with-x-toolkit=motif \
# --with-wnn --with-wnn-includes=/usr/lib/locale/ja/wnn/demo/include --with-wnn-libraries=/usr/lib/locale/ja/wnn/lib
${GMAKE}
${GMAKE} install
exit
Solaris でのインストールの注意点は次の通りです。
次に xemacs をインストールします。xemacs-21.4.17 のインストール手順を書いています.
/bin/sh echo xemacs-sumo-2005-05-05 mkdir /usr/local/lib mkdir /usr/local/lib/xemacs cd /tmp; if [ ! -f xemacs-sumo-2005-05-05.tar.gz ]; then # wget xemacs-sumo-2005-05-05.tar.gz fi # extract into /usr/local/lib/xemacs cd /usr/local/lib/xemacs /usr/bin/gzip -d < /tmp/xemacs-sumo-2005-05-05.tar.gz | /usr/bin/tar -xvof - echo xemacs-mule-sumo-2005-05-05 cd /tmp; if [ ! -f xemacs-mule-sumo-2005-05-05.tar.gz ]; then # wget xemacs-mule-sumo-2005-05-05.tar.gz fi # extract into /usr/local/lib/xemacs cd /usr/local/lib/xemacs /usr/bin/gzip -d < /tmp/xemacs-mule-sumo-2005-05-05.tar.gz | /usr/bin/tar -xvof - cd /usr/local/lib/xemacs/mule-packages/etc/app-defaults rm -f ja_JP.eucJP ln -s ja ja_JP.eucJP echo xemacs-21.4.17 cd /tmp; if [ ! -f xemacs-21.4.17.tar.gz ]; then # wget xemacs-21.4.17.tar.gz fi # extract source file cd /tmp rm -rf xemacs-21.4.17 /usr/bin/gzip -d < xemacs-21.4.17.tar.gz | /usr/bin/tar -xvof - # configure, make, and install cd /tmp/xemacs-21.4.17 cp src/s/sol2.h src/s/sol2.h.DIST cat src/s/sol2.h.DIST | sed 's/typedef void \*__gnuc_va_list;/typedef __builtin_va_list __gnuc_va_list;/g' > src/s/sol2.h ./configure --with-gcc=yes --with-mule --with-xim --with-xfs --with-site-lisp --pdump --without-canna --without-wnn \ --with-x11 --site-libraries=/usr/local/lib --site-includes=/usr/local/include make make -k install
参考情報
Solaris の ATOK サーバと通信して、日本語入力ができるようにするために、下記の手順で、IIIMECF, Mule-UCS をダウンロード、展開、インストールします。
cd /tmp if [ ! -f Mule-UCS-0.84.tar.gz ]; then # wget Mule-UCS-0.84.tar.gz fi /usr/bin/gzip -d < Mule-UCS-0.84.tar.gz | tar -xvof - cd /tmp/Mule-UCS-0.84 /usr/local/bin/xemacs --vanilla -batch -l *.el mkdir /usr/local/lib/xemacs/site-lisp/mule-ucs cp /tmp/Mule-UCS-0.84/lisp/*.elc /usr/local/lib/xemacs/site-lisp/mule-ucs cd /tmp if [ ! -f IIIMECF-0.6.tar.gz ]; then # wget IIIMECF-0.6.tar.gz fi /usr/bin/gzip -d < IIIMECF-0.6.tar.gz | tar -xvof - cd /tmp/IIIMECF-0.6 /usr/local/bin/xemacs --vanilla -batch -l *.el mkdir /usr/local/lib/xemacs/site-lisp/iiimecf cp /tmp/IIIMECF-0.6/lisp/*.elc /usr/local/lib/xemacs/site-lisp/iiimecf
なお、IIIMECF, Mule-UCS は、 ftp://ftp.m17n.org/pub/mule/ （現存しない） で配布されていた．
IIIMECF の README を読んで .xemacs/init.el を記述します。設定例は次の 通りです。 Ctrl + バックスラッシュで、入力モードの切替えになります。
;;
(set-language-environment "Japanese")
(define-key global-map "\C-\\" 'toggle-input-method)
;;
(setq iiimcf-server-control-hostlist '("localhost"))
(setq iiimcf-server-control-default-language "ja")
(setq default-input-method 'iiim-server-control)
(require 'iiimcf-sc)
(eval-after-load "'iiimcf-sc"
(setq modeline-format default-modeline-format))
X11R6.9.0 の make 手順である。 下記の「cp /tmp/site.def xc/config/cf/site.def」では、ProjectRoot, HasGcc2, OSMajorVersion, OSMinorVersion 等の設定を行なっています。
【関連する外部ページ】X Window http://www.x.org
rehash
cd /tmp
/usr/local/bin/wget https://www.kkaneko.jp/tools/src/X11R6.9.0/X11R6.9.0-src1.tar.gz
/usr/local/bin/wget https://www.kkaneko.jp/tools/src/X11R6.9.0/X11R6.9.0-src2.tar.gz
/usr/local/bin/wget https://www.kkaneko.jp/tools/src/X11R6.9.0/X11R6.9.0-src3.tar.gz
/usr/local/bin/wget https://www.kkaneko.jp/tools/src/X11R6.9.0/X11R6.9.0-src4.tar.gz
/usr/local/bin/wget https://www.kkaneko.jp/tools/src/X11R6.9.0/X11R6.9.0-src5.tar.gz
/usr/local/bin/wget https://www.kkaneko.jp/tools/src/X11R6.9.0/X11R6.9.0-src6.tar.gz
/usr/local/bin/wget https://www.kkaneko.jp/tools/src/X11R6.9.0/X11R6.9.0-src7.tar.gz
# ここで，site.def を設定すること
mkdir /tmp/src
cd /tmp/src
gzip -d < /tmp/X11R6.9.0-src1.tar.gz | tar -xvof -
gzip -d < /tmp/X11R6.9.0-src2.tar.gz | tar -xvof -
gzip -d < /tmp/X11R6.9.0-src3.tar.gz | tar -xvof -
gzip -d < /tmp/X11R6.9.0-src4.tar.gz | tar -xvof -
gzip -d < /tmp/X11R6.9.0-src5.tar.gz | tar -xvof -
gzip -d < /tmp/X11R6.9.0-src6.tar.gz | tar -xvof -
gzip -d < /tmp/X11R6.9.0-src7.tar.gz | tar -xvof -
cp /tmp/site.def /tmp/src/xc/config/cf/site.def
# ここで site.def を編集. ProjectRoot, OSMinorVersion, GccMajorVersion, GCCMinorVersion 等を適切に設定します。
cd xc
# make は Solaris の make を使っても良いようです
/usr/local/bin/gmake -k World
# インストールの前にスーパーユーザになる
# "/usr/local/X11R6.9.0" は、site.def に設定した ProjectRoot にあわせる
ln -s /usr/local/X11R6.9.0 /usr/X11R6
cd /tmp/src/xc
/usr/local/bin/gmake -k install
その他、あると便利なツールです。 次の手順で行う。
事前準備
SUN のコンパイラで無く、GNU のコンパイラを使いたい時は、 /usr/openwin/lib/config/site.def の HasGcc2 のコメントを外すこと。
インストール
古いバージョンのソースコードが必要になることがあるので、 消さずに置いている。
#!/bin/sh
# For more information: https://www.kkaneko.jp/tools/solaris/solaris_optionsoft.html
prefix=/usr/local
export prefix
#
#
#
SROOT=/tmp
SRCURL="https://www.kkaneko.jp/tools/src/toollib"
PATH=/usr/bin:/usr/sbin:/sbin:/usr/local/SUNWspro/bin:/usr/local/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/X11/bin:/usr/openwin/bin:/usr/dt/bin:/usr/openwin/demo/bin:/usr/local/X11R6.9.0/bin:/opt/SUNWspro/bin:/usr/ucb:/usr/local/netpbm/bin:/opt/sfw/bin
LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/usr/ccs/lib:/opt/sfw/lib:/usr/dt/lib:/usr/X11/lib:/usr/openwin/lib:/usr/local/X11R6.9.0/lib:/usr/ucblib:/opt/SUNWspro/lib:/opt/SUNWdtpcv/lib:/opt/SUNWits/Graphics-sw/xil/lib:/opt/SUNWits/Graphics-sw/xgl-3.0/lib
PATH=/usr/local/bin:$PATH
export PATH
LD_LIBRARY_PATH=/usr/local/bin:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
if [ -f /usr/local/bin/libtool ]; then
LIBTOOL=/usr/local/bin/libtool
export LIBTOOL
else
LIBTOOL=/opt/sfwl/bin/libtool
export LIBTOOL
fi
# make
if [ -x /usr/local/bin/gmake ]; then
MAKE="/usr/local/bin/gmake"
GNUMAKE="/usr/local/bin/gmake"
elif [ -x /opt/sfw/bin/gmake ]; then
MAKE="/opt/sfw/bin/gmake"
GNUMAKE="/opt/sfw/bin/gmake"
fi
# gzip
if [ -x /usr/bin/gzip ]; then
GZIP=/usr/bin/gzip
elif [ -x /usr/local/bin/gzip ]; then
GZIP=/usr/local/bin/gzip
fi
# gtar
if [ -x /usr/local/bin/gtar ]; then
GTAR=/usr/local/bin/gtar
elif [ -x /opt/sfw/bin/gtar ]; then
GZIP=/opt/sfw/bin/gtar
fi
PATCH=/usr/local/bin/patch
XDIR=/usr/openwin
# XDIR=/usr/X11R6
# XDIR=/usr/local/X11R6.9.0
XFONTDIR=${XDIR}/lib/X11/fonts
XMKMF=${XDIR}/bin/xmkmf
#libraries
# libwmf 0.2.5 (or later) from http://sourceforge.net/projects/wvware/ to render files in the Windows Meta File (WMF) metafile format
# LCMS library available from http://www.littlecms.com/
# JBIG-Kit software available via HTTP from http://www.cl.cam.ac.uk/~xml25/jbigkit/
# EXIF library available via http from http://sourceforge.net/projects/libexif
# MPEG utilities from the MPEG Software Simulation Group, which are available via anonymous FTP as ftp://ftp.mpeg.org/pub/mpeg/mssg/mpeg2vidcodec_v12.tar.gz
#tools
# htmltops http://www.tdb.uu.se/~jan/html2ps.html
#
# basic tools and libs
#
#
# library
#
echo fltk-1.1.4-source.tar.gz
echo A X11 Toolkit
cd ${SROOT}; if [ ! -f fltk-1.1.4-source.tar.gz ]; then
wget ${SRCURL}/fltk-1.1.4-source.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/fltk-1.1.4-source.tar.gz
cd /tmp; cd fltk-1.1.4; ./configure --enable-shared --enable-threads
cd /tmp; cd fltk-1.1.4; ${MAKE} clean
cd /tmp; cd fltk-1.1.4; ${MAKE}
cd /tmp; cd fltk-1.1.4; ${MAKE} install
cd /tmp; rm -rf fltk-1.1.4
echo fnlib-0.5.tar.gz
echo X11 font rendering library
cd ${SROOT}; if [ ! -f fnlib-0.5.tar.gz ]; then
wget ${SRCURL}/fnlib-0.5.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/fnlib-0.5.tar.gz
cd /tmp; cd fnlib-0.5; ./configure
cd /tmp; cd fnlib-0.5; ${MAKE} clean
cd /tmp; cd fnlib-0.5; ${MAKE}
cd /tmp; cd fnlib-0.5; ${MAKE} check
cd /tmp; cd fnlib-0.5; ${MAKE} install
cd /tmp; rm -rf fnlib-0.5
echo libpcap-0.9.4.tar.gz
echo Packet Capture Library
cd ${SROOT}; if [ ! -f libpcap-0.9.4.tar.gz ]; then
wget ${SRCURL}/libpcap-0.9.4.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/libpcap-0.9.4.tar.gz
cd /tmp; cd libpcap-0.9.4; ./configure
cd /tmp; cd libpcap-0.9.4; ${MAKE} clean
cd /tmp; cd libpcap-0.9.4; ${MAKE}
cd /tmp; cd libpcap-0.9.4; ${MAKE} install
cd /tmp; rm -rf libpcap-0.9.4
echo libungif-4.1.4.tar.gz
echo GIF files library
cd ${SROOT}; if [ ! -f libungif-4.1.4.tar.gz ]; then
wget ${SRCURL}/libungif-4.1.4.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/libungif-4.1.4.tar.gz
cd /tmp; cd libungif-4.1.4; ./configure --enable-shared --enable-static
cd /tmp; cd libungif-4.1.4; ${MAKE} clean
cd /tmp; cd libungif-4.1.4; ${MAKE}
cd /tmp; cd libungif-4.1.4; ${MAKE} install
cd /tmp; rm -rf libungif-4.1.4
echo pcre-7.4.tar.gz
echo regular expression library
cd ${SROOT}; if [ ! -f pcre-7.4.tar.gz ]; then
wget ${SRCURL}/pcre-7.4.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/pcre-7.4.tar.gz | tar -xvof -
cd /tmp; cd pcre-7.4; ./configure --enable-shared --enable-static
cd /tmp; cd pcre-7.4; ${MAKE} clean
cd /tmp; cd pcre-7.4; ${MAKE}
cd /tmp; cd pcre-7.4; ${MAKE} install
cd /tmp; rm -rf pcre-7.4
echo db-2.7.7:
echo db is the Berkeley open source embedded database system
cd ${SROOT}; if [ ! -f db-2.7.7.tar.gz ]; then
wget ${SRCURL}/db-2.7.7.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/db-2.7.7.tar.gz
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd db-2.7.7/build_unix; CC=cc ../dist/configure
else
cd /tmp; cd db-2.7.7/build_unix; CC=gcc ../dist/configure
fi
cd /tmp; cd db-2.7.7/build_unix; ${MAKE} clean
cd /tmp; cd db-2.7.7/build_unix; ${MAKE}
cd /tmp; cd db-2.7.7/build_unix; ${MAKE} install
cd /tmp; rm -rf cd db-2.7.7
echo db-3.3.11:
echo db is the Berkeley open source embedded database system
cd ${SROOT}; if [ ! -f db-3.3.11.tar.gz ]; then
wget ${SRCURL}/db-3.3.11.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/db-3.3.11.tar.gz
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd db-3.3.11/build_unix; CC=cc ../dist/configure --enable-shared --enable-static
else
cd /tmp; cd db-3.3.11/build_unix; CC=gcc ../dist/configure --enable-shared --enable-static
fi
cd /tmp; cd db-3.3.11/build_unix; ${MAKE} clean
cd /tmp; cd db-3.3.11/build_unix; ${MAKE}
cd /tmp; cd db-3.3.11/build_unix; ${MAKE} install
cd /tmp; rm -rf db-3.3.11
echo zip-2.3:
cd ${SROOT}; if [ ! -f zip-2.3.tar.gz ]; then
wget ${SRCURL}/zip-2.3.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/zip-2.3.tar.gz
cd /tmp; cd zip-2.3; cp unix/Makefile .
cd /tmp; cd zip-2.3; ${MAKE} clean
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd zip-2.3; ${MAKE} generic svr4package
else
cd /tmp; cd zip-2.3; ${MAKE} CC=gcc CPP="gcc -E" generic svr4package
fi
cd /tmp; cd zip-2.3; ${MAKE} install
cd /tmp; rm -rf zip-2.3
echo zlib-1.2.3.tar.gz
echo zlib compression libraries
cd ${SROOT}; if [ ! -f zlib-1.2.3.tar.gz ]; then
wget ${SRCURL}/../zlib-1.2.3.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/zlib-1.2.3.tar.gz
cd /tmp; cd zlib-1.2.3; ./configure --shared
cd /tmp; cd zlib-1.2.3; ${MAKE} clean
cd /tmp; cd zlib-1.2.3; ${MAKE}
cd /tmp; cd zlib-1.2.3; ${MAKE} install
cd /tmp; rm -rf zlib-1.2.3
echo to be done
echo xaw3d-1.5:
echo Xaw3D is a set of 3-D widgets based on the R6.1/R6.3/R6.4 Athena Widget set
cd ${SROOT}; if [ ! -f xaw3d-1.5.tar.gz ]; then
wget ${SRCURL}/xaw3d-1.5.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/xaw3d-1.5.tar.gz
cd /tmp; cd xc/lib/Xaw3d; ${XMKMF} -a
cd /tmp; cd xc/lib/Xaw3d; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd xc/lib/Xaw3d; ${MAKE} CC=gcc
fi
cd /tmp; cd xc/lib/Xaw3d; ${MAKE}
cd /tmp; cd xc/lib/Xaw3d; ${MAKE} install
echo expat-1.95.8:
echo Expat is a fast, non-validating, stream-oriented XML parsing library
cd ${SROOT}; if [ ! -f expat-1.95.8.tar.gz ]; then
wget ${SRCURL}/expat-1.95.8.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/expat-1.95.8.tar.gz
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd expat-1.95.8; ./configure CC=cc --enable-static --enable-shared
else
cd /tmp; cd expat-1.95.8; ./configure CC=gcc --enable-static --disable-shared
fi
cd /tmp; cd expat-1.95.8; ${MAKE} clean
cd /tmp; cd expat-1.95.8; ${MAKE}
cd /tmp; cd expat-1.95.8; ${MAKE} install
cd /tmp; rm -rf expat-1.95.8
echo freetype-2.3.5
echo freetype
cd ${SROOT}; if [ ! -f freetype-2.3.5.tar.gz ]; then
wget ${SRCURL}/freetype-2.3.5.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/freetype-2.3.5.tar.gz | tar -xvof -
cd /tmp; cd freetype-2.3.5; GNUMAKE=${GNUMAKE} ./configure
cd /tmp; cd freetype-2.3.5; ${MAKE}
cd /tmp; cd freetype-2.3.5; ${MAKE} install
cd /tmp; rm -rf freetype-2.3.5
# It does not work ... ?
echo fontconfig-2.2.3.tar.gz
echo Fontconfig is a library for configuring and customizing font access. It depends on freetype, zlib, expat.
cd ${SROOT}; if [ ! -f fontconfig-2.2.3.tar.gz ]; then
wget ${SRCURL}/fontconfig-2.2.3.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/fontconfig-2.2.3.tar.gz
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd fontconfig-2.2.3; ./configure CC=cc --enable-static --enable-shared
else
cd /tmp; cd fontconfig-2.2.3; ./configure CC=gcc --enable-static --disable-shared
fi
cd /tmp; cd fontconfig-2.2.3; ${MAKE} clean
cd /tmp; cd fontconfig-2.2.3; ${MAKE}
cd /tmp; cd fontconfig-2.2.3; ${MAKE} install
cd /tmp; rm -rf fontconfig-2.2.3
echo pkg-config-0.19:
cd ${SROOT}; if [ ! -f pkg-config-0.19.tar.gz ]; then
wget ${SRCURL}/pkg-config-0.19.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/pkg-config-0.19.tar.gz | tar -xvof -
cd /tmp; cd pkg-config-0.19; ./configure
cd /tmp; cd pkg-config-0.19; ${MAKE} clean
cd /tmp; cd pkg-config-0.19; ${MAKE}
cd /tmp; cd pkg-config-0.19; ${MAKE} install
cd /tmp; rm -rf pkg-config-0.19
echo libpixman-0.1.5:
cd ${SROOT}; if [ ! -f libpixman-0.1.5.tar.gz ]; then
wget ${SRCURL}/libpixman-0.1.5.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/libpixman-0.1.5.tar.gz | tar -xvof -
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd libpixman-0.1.5; ./configure CC=cc --enable-static --enable-shared
else
cd /tmp; cd libpixman-0.1.5; ./configure CC=gcc --enable-static --disable-shared
fi
cd /tmp; cd libpixman-0.1.5; ${MAKE} clean
cd /tmp; cd libpixman-0.1.5; ${MAKE}
cd /tmp; cd libpixman-0.1.5; ${MAKE} install
cd /tmp; rm -rf libpixman-0.1.5
echo glitz-0.4.3:
cd ${SROOT}; if [ ! -f glitz-0.4.3.tar.gz ]; then
wget ${SRCURL}/glitz-0.4.3.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/glitz-0.4.3.tar.gz | tar -xvof -
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd glitz-0.4.3; ./configure CC=cc --enable-static --enable-shared
else
cd /tmp; cd glitz-0.4.3; ./configure CC=gcc --enable-static --disable-shared
fi
cd /tmp; cd glitz-0.4.3; ${MAKE} clean
cd /tmp; cd glitz-0.4.3; ${MAKE}
cd /tmp; cd glitz-0.4.3; ${MAKE} install
cd /tmp; rm -rf glitz-0.4.3
echo xrender-0.8.3:
cd ${SROOT}; if [ ! -f xrender-0.8.3.tar.gz ]; then
wget ${SRCURL}/xrender-0.8.3.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/xrender-0.8.3.tar.gz | tar -xvof -
cd /tmp; cd xrender-0.8.3; ./configure --enable-static --enable-shared
cd /tmp; cd xrender-0.8.3; ${MAKE} clean
cd /tmp; cd xrender-0.8.3; ${MAKE}
cd /tmp; cd xrender-0.8.3; ${MAKE} install
cd /tmp; rm -rf xrender-0.8.3
echo cairo-1.4.10:
echo It requires pixman, glitz, and xrender
cd ${SROOT}; if [ ! -f cairo-1.4.10.tar.gz ]; then
wget ${SRCURL}/cairo-1.4.10.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/cairo-1.4.10.tar.gz | tar -xvof -
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd cairo-1.4.10; ./configure CC=cc --enable-static --enable-shared
else
cd /tmp; cd cairo-1.4.10; ./configure CC=gcc --enable-static --disable-shared
fi
cd /tmp; cd cairo-1.4.10; ${MAKE} clean
cd /tmp; cd cairo-1.4.10; ${MAKE}
cd /tmp; cd cairo-1.4.10; ${MAKE} install
cd /tmp; rm -rf cairo-1.4.10
echo OpenSP-1.5.1:
cd ${SROOT}; if [ ! -f openjade-1.3.2.tar.gz ]; then
wget ${SRCURL}/OpenSP-1.5.1.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/OpenSP-1.5.1.tar.gz | tar -xvof -
# cd /tmp; cd OpenSP-1.5.1; CXX="g++ -V 3.3.6" ./configure --enable-static --enable-shared
cd /tmp; cd OpenSP-1.5.1; ./configure
cd /tmp; cd OpenSP-1.5.1; ${MAKE} clean
cd /tmp; cd OpenSP-1.5.1; ${MAKE}
cd /tmp; cd OpenSP-1.5.1; ${MAKE} install
cd /tmp; rm -rf OpenSP-1.5.1
echo openjade-1.3.2:
echo OpenJade is a project undertaken by the DSSSL community to maintain and extend Jade by James Clark
cd ${SROOT}; if [ ! -f openjade-1.3.2.tar.gz ]; then
wget ${SRCURL}/openjade-1.3.2.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/openjade-1.3.2.tar.gz | tar -xvof -
# cd /tmp; cd openjade-1.3.2; CXX="g++ -V 3.3.6" ./configure --enable-static --enable-shared
cd /tmp; cd openjade-1.3.2; ./configure
cd /tmp; cd openjade-1.3.2; ${MAKE} clean
cd /tmp; cd openjade-1.3.2; ${MAKE}
cd /tmp; cd openjade-1.3.2; ${MAKE} install
cd /tmp; rm -rf openjade-1.3.2
echo glib-1.3.15:
echo GLib is the low-level core library that forms the basis of GTK+ and GNOME. It requires libiconv.
cd ${SROOT}; if [ ! -f glib-1.3.15.tar.gz ]; then
wget ${SRCURL}/glib-1.3.15.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/glib-1.3.15.tar.gz | tar -xvof -
cd /tmp; cd glib-1.3.15; ./configure --with-libiconv
cd /tmp; cd glib-1.3.15; ${MAKE} clean
cd /tmp; cd glib-1.3.15; ${MAKE}
cd /tmp; cd glib-1.3.15; ${MAKE} install
cd /tmp; rm -rf glib-1.3.15
echo glib-2.14.4:
echo GLib is the low-level core library that forms the basis of GTK+ and GNOME. It requires libiconv.
cd ${SROOT}; if [ ! -f glib-2.14.4.tar.gz ]; then
wget ${SRCURL}/glib-2.14.4.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/glib-2.14.4.tar.gz | tar -xvof -
cd /tmp; cd glib-2.14.4; ./configure --with-libiconv
cd /tmp; cd glib-2.14.4; ${MAKE} clean
cd /tmp; cd glib-2.14.4; ${MAKE}
cd /tmp; cd glib-2.14.4; ${MAKE} install
cd /tmp; rm -rf glib-2.14.4
echo pango-1.9.0a:
echo Pango provides a framework and libraries for the layout and rendering of internationalized text. It requires expat, freetype, fontconfig, zlib, glib, libiconv, pkg-config
cd ${SROOT}; if [ ! -f pango-1.19.0.tar.gz ]; then
wget ${SRCURL}/pango-1.19.0.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/pango-1.19.0.tar.gz | tar -xvof -
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd pango-1.19.0; ./configure CC=cc --enable-static --enable-shared
else
cd /tmp; cd pango-1.19.0; ./configure CC=gcc --enable-static --disable-shared
fi
cd /tmp; cd pango-1.19.0; ${MAKE} clean
cd /tmp; cd pango-1.19.0; ${MAKE}
cd /tmp; cd pango-1.19.0; ${MAKE} install
cd /tmp; rm -rf pango-1.19.0
# glib-2.4.1 is necessary just to compile atk on Solaris 10
echo glib-2.4.1:
if [ -f /usr/lib/libglib-2.0.so.0.400.1 ]; then
cd ${SROOT}; if [ ! -f glib-2.4.1.tar.gz ]; then
wget ${SRCURL}/glib-2.4.1.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/glib-2.4.1.tar.gz | tar -xvof -
cd /tmp; cd glib-2.4.1; ./configure --with-libiconv
cd /tmp; cd glib-2.4.1; ${MAKE} clean
cd /tmp; cd glib-2.4.1; ${MAKE}
cd /tmp; cd glib-2.4.1; ${MAKE} install
cd /tmp; rm -rf glib-2.4.1
fi
echo atk-1.20.0:
echo The GNOME accessibility toolkit.
cd ${SROOT}; if [ ! -f atk-1.20.0.tar.gz ]; then
wget ${SRCURL}/atk-1.20.0.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/atk-1.20.0.tar.gz | tar -xvof -
cd /tmp; cd atk-1.20.0; ./configure
cd /tmp; cd atk-1.20.0; ${MAKE} clean
cd /tmp; cd atk-1.20.0; ${MAKE}
cd /tmp; cd atk-1.20.0; ${MAKE} install
cd /tmp; rm -rf atk-1.20.0
# glib-2.14.4 is installed again on Solaris 10
echo glib-2.14.4:
if [ -f /usr/lib/libglib-2.0.so.0.400.1 ]; then
cd ${SROOT}; if [ ! -f glib-2.14.4.tar.gz ]; then
wget ${SRCURL}/glib-2.14.4.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/glib-2.14.4.tar.gz | tar -xvof -
cd /tmp; cd glib-2.14.4; ./configure --with-libiconv
cd /tmp; cd glib-2.14.4; ${MAKE} clean
cd /tmp; cd glib-2.14.4; ${MAKE}
cd /tmp; cd glib-2.14.4; ${MAKE} install
cd /tmp; rm -rf glib-2.14.4
fi
echo gtk+-2.8.6:
cd ${SROOT}; if [ ! -f gtk+-2.8.6.tar.gz ]; then
wget ${SRCURL}/gtk+-2.8.6.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/gtk+-2.8.6.tar.gz | tar -xvof -
cd /tmp; cd gtk+-2.8.6; ./configure
cd /tmp; cd gtk+-2.8.6; ${MAKE} clean
cd /tmp; cd gtk+-2.8.6; ${MAKE}
cd /tmp; cd gtk+-2.8.6; ${MAKE} install
cd /tmp; rm -rf gtk+-2.8.6
# libxml2-2.6.22 is necessary to install libgnome
echo libxml2-2.6.22
cd ${SROOT}; if [ ! -f libxml2-2.6.22.tar.gz ]; then
wget ${SRCURL}/libxml2-2.6.22.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/libxml2-2.6.22.tar.gz | tar -xvof -
cd /tmp; cd libxml2-2.6.22; ./configure
cd /tmp; cd libxml2-2.6.22; ${MAKE} clean
cd /tmp; cd libxml2-2.6.22; ${MAKE}
cd /tmp; cd libxml2-2.6.22; ${MAKE} install
cd /tmp; rm -rf libxml2-2.6.22
echo libgnome-2.12.0.1
cd ${SROOT}; if [ ! -f libgnome-2.12.0.1.tar.gz ]; then
wget ${SRCURL}/libgnome-2.12.0.1.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/libgnome-2.12.0.1.tar.gz | tar -xvof -
cd /tmp; cd libgnome-2.12.0.1; ./configure
cd /tmp; cd libgnome-2.12.0.1; ${MAKE} clean
cd /tmp; cd libgnome-2.12.0.1; ${MAKE}
cd /tmp; cd libgnome-2.12.0.1; ${MAKE} install
cd /tmp; rm -rf libgnome-2.12.0.1
# It does not work ... ?
echo gd-2.0.33:
cd ${SROOT}; if [ ! -f gd-2.0.33.tar.gz ]; then
wget ${SRCURL}/gd-2.0.33.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/gd-2.0.33.tar.gz | tar -xvof -
cd /tmp; cd gd-2.0.33; ./configure
cd /tmp; cd gd-2.0.33; ${MAKE} clean
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd gd-2.0.33; ${MAKE} CC="cc -I/usr/local/include"
else
cd /tmp; cd gd-2.0.33; ${MAKE} CC="gcc -I/usr/local/include"
fi
cd /tmp; cd gd-2.0.33; ${MAKE} install
cd /tmp; rm -rf gd-2.0.33
echo xpm-3.4k:
echo XPM format library
cd ${SROOT}; if [ ! -f xpm-3.4k.tar.gz ]; then
wget ${SRCURL}/xpm-3.4k.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/xpm-3.4k.tar.gz | tar -xvof -
cd /tmp; cd xpm-3.4k; ${XMKMF} -a
cd /tmp; cd xpm-3.4k; ${MAKE} clean
cd /tmp; cd xpm-3.4k; ${MAKE}
cd /tmp; cd xpm-3.4k; ${MAKE} install
cd /tmp; cd xpm-3.4k; ${MAKE} install.man
cd /tmp; rm -rf xpm-3.4k
#
# Japanese and Asian
#
echo kterm-6.2.0:
cd ${SROOT}; if [ ! -f kterm-6.2.0.tar.gz ]; then
wget ${SRCURL}/kterm-6.2.0.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/kterm-6.2.0.tar.gz | tar -xvof -
# cd /tmp; cat ${SROOT}/kterm-6.2.0-6.2.0.wd0.2.patch.gz| ${GZIP} -d | patch -p0
cd /tmp; cd kterm-6.2.0; ${XMKMF} -a
cd /tmp; cd kterm-6.2.0; ${MAKE} clean
cd /tmp; cd kterm-6.2.0; ${MAKE}
cd /tmp; cd kterm-6.2.0; ${MAKE} install
cd /tmp; cd kterm-6.2.0; ${MAKE} install.man
cd /tmp; rm -rf kterm-6.2.0
# It does not work ... ?
echo Canna37p3:
cd ${SROOT}; if [ ! -f Canna37p3.tar.gz ]; then
wget ${SRCURL}/Canna37p3.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/Canna37p3.tar.gz
cd /tmp; cd Canna37p3; cp ${SROOT}/Canna.conf Canna.conf
cd /tmp; cd Canna37p3; ${XMKMF}
cd /tmp; cd Canna37p3; ${MAKE} Makefile
cd /tmp; cd Canna37p3; ${MAKE} canna
cd /tmp; cd Canna37p3; ${MAKE} install
cd /tmp; cd Canna37p3; ${MAKE} install.man
cd /tmp; rm -rf Canna37p3
echo kanji-type:
cd ${SROOT}; if [ ! -f kanji-type.tar.gz ]; then
wget ${SRCURL}/kanji-type.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/kanji-type.tar.gz
cd /tmp; cd kanji-type; ${MAKE}
cd /tmp; cd kanji-type; cp kanjitype /usr/local/bin
cd /tmp; rm -rf kanji-type
echo nkf207:
cd ${SROOT}; if [ ! -f nkf207.tar.gz ]; then
wget ${SRCURL}/nkf207.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/nkf207.tar.gz
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd nkf207; ${MAKE} CC=cc
else
cd /tmp; cd nkf207; ${MAKE} CC=gcc
fi
cd /tmp; cd nkf207; cp nkf /usr/local/bin/nkf
cd /tmp; cd nkf207; cp nkf.1 /usr/local/man/man1/nkf.1
cd /tmp; rm -rf nkf207
# It does not work ... ?
echo kinput2-v3.1:
cd ${SROOT}; if [ ! -f kinput2-v3.1.tar.gz ]; then
wget ${SRCURL}/kinput2-v3.1.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/kinput2-v3.1.tar.gz
cd /tmp; cd kinput2-v3.1; cp ${SROOT}/Kinput2-v3.conf Kinput2.conf
cd /tmp; cd kinput2-v3.1; ${XMKMF} -a
cd /tmp; cd kinput2-v3.1; ${MAKE}
cd /tmp; cd kinput2-v3.1; ${MAKE} install
cd /tmp; cd kinput2-v3.1; ${MAKE} install.man
cd /tmp; rm -rf kinput2-v3.1
echo xemacs
echo xemacs-sumo
cd /tmp; if [ ! -f xemacs-mule-sumo-2005-05-05.tar.gz ]; then
wget ${SRCURL}/xemacs-mule-sumo-2005-05-05.tar.gz
fi
cd /tmp; if [ ! -f xemacs-sumo-2005-05-05.tar.gz ]; then
wget ${SRCURL}/xemacs-sumo-2005-05-05.tar.gz
fi
mkdir /usr/local/lib/xemacs
cd /usr/local/lib/xemacs; gzip -d < /tmp/xemacs-mule-sumo-2005-05-05.tar.gz | tar -xvfp -
cd /usr/local/lib/xemacs; gzip -d < /tmp/xemacs-sumo-2005-05-05.tar.gz | tar -xvfp -
cd /usr/local/lib/xemacs/mule-packages/etc/app-defaults
ln -s ja ja_JP.EUC
cd /tmp; if [ ! -f xemacs-21.5.21.tar.gz ]; then
wget ${SRCURL}/xemacs-21.5.21.tar.gz
fi
echo xemacs
mkdir /usr/local/lib/xemacs
mkdir /usr/local/lib/xemacs/site-lisp
cd /tmp; rm -rf xemacs-21.5.21
cd /tmp; gzip -d < /tmp/xemacs-21.5.21.tar.gz | tar -xvof -
cd /tmp; cd xemacs-21.5.21; ./configure --prefix=/usr/local --with-mule --with-x11 --site-libraries=/usr/local/lib --site-includes=/usr/local/include --with-site-lisp --with-xfs
cd /tmp; cd xemacs-21.5.21; ${MAKE} clean
cd /tmp; cd xemacs-21.5.21; ${MAKE}
cd /tmp; cd xemacs-21.5.21; ${MAKE} install
echo mule-2.3-19.34:
cd /tmp; if [ ! -f mule-2.3-19.34.tar.gz ]; then
wget ${SRCURL}/mule-2.3-19.34.tar.gz
fi
cd /tmp; if [ ! -f mule-2.3-19.34.patch-981002.tar.gz ]; then
wget ${SRCURL}/mule-2.3-19.34.patch-981002.tar.gz
fi
rm -rf /tmp/mule-2.3-19.34
cd /tmp; ${GTAR} -xvzof ${SROOT}/mule-2.3-19.34.tar.gz
cd /tmp/mule-2.3-19.34; gzip -d < ${SROOT}/mule-2.3-19.34.patch-981002.tar.gz | tar -xvf -
cd /tmp/mule-2.3-19.34; CC=gcc CFLAGS="-O" ./configure --exec_prefix=/usr/local --prefix=/usr/local
--with-x --with-x11 --with-x-toolkit=no --with-bdf-path=${XDIR}b/lib/X11/fonts \
--with-gcc \
--verbose
cd /tmp/mule-2.3-19.34; ${MAKE} MAKE=${GNUMAKE}
cd /tmp/mule-2.3-19.34; ${MAKE} install
cd /usr/local; strip emacs
cd /usr/local; strip emacs-19.34
#
# tools
#
echo afio-2.5.tar.gz:
echo archives and files
cd ${SROOT}; if [ ! -f afio-2.5.tar.gz ]; then
wget ${SRCURL}/afio-2.5.tar.gz
fi
rm -rf /tmp/afio-2.5
cd /tmp; ${GTAR} -xvzof ${SROOT}/afio-2.5.tar.gz
cd /tmp; cd afio-2.5; ./configure
cd /tmp; cd afio-2.5; ${MAKE} clean
cd /tmp; cd afio-2.5; ${MAKE}
cd /tmp; cd afio-2.5; cp afio /usr/local/bin
cd /tmp; cd afio-2.5; cp afio.1 /usr/local/man/man1
cd /tmp; rm -rf afio-2.5
echo beav_1.40-18:
echo binary file editor
cd ${SROOT}; if [ ! -f beav_1.40-18.tar.gz ]; then
wget ${SRCURL}/beav_1.40-18.tar.gz
fi
cd /tmp; cd beav-1.40; cat symbol.c | sed 's/extern char clock ();//g' > /tmp/a.c; cp /tmp/a.c symbol.c
cd /tmp; cd beav-1.40; ${MAKE} -f makefile.uxv clean
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd beav-1.40; ${MAKE} -f makefile.uxv
else
cd /tmp; cd beav-1.40; ${MAKE} -f makefile.uxv CC=gcc
fi
cd /tmp; cd beav-1.40; cp beav /usr/local/bin;
chmod 755 /usr/local/bin/beav
cd /tmp; rm -rf beav-1.40
# It does not work ... ?
echo cdrtools-2.01:
echo creating CDs and DVDs
cd ${SROOT}; if [ ! -f cdrtools-2.01.tar.bz2 ]; then
wget ${SRCURL}/cdrtools-2.01.tar.bz2
fi
cd /tmp; ${GTAR} -xvjof ${SROOT}/cdrtools-2.01.tar.bz2
if [ -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd cdrtools-2.01; CC=cc ./configure
cd /tmp; cd cdrtools-2.01; ${MAKE} CC=cc
else
cd /tmp; cd cdrtools-2.01; CC=gcc ./configure
cd /tmp; cd cdrtools-2.01; ${MAKE} CC=gcc
fi
cd /tmp; cd cdrtools-2.01; ${MAKE} install
cd /tmp; rm -rf cdrtools-2.01
echo ctags-5.5.4:
echo tag files for source code
cd ${SROOT}; if [ ! -f ctags-5.5.4.tar.gz ]; then
wget ${SRCURL}/ctags-5.5.4.tar.gz
fi
rm -rf /tmp/ctags-5.5.4
cd /tmp; ${GTAR} -xvzof ${SROOT}/ctags-5.5.4.tar.gz
cd /tmp; cd ctags-5.5.4; ./configure
cd /tmp; cd ctags-5.5.4; ${MAKE} clean
cd /tmp; cd ctags-5.5.4; ${MAKE}
cd /tmp; cd ctags-5.5.4; ${MAKE} install
cd /tmp; rm -rf ctags-5.5.4
# It does not work ... ?
echo lha-114i:
cd ${SROOT}; if [ ! -f lha-114i.tar.gz ]; then
wget ${SRCURL}/lha-114i.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/lha-114i.tar.gz
cd /tmp; cd lha-114i; ${MAKE} clean
cd /tmp; cd lha-114i; ${MAKE} all
cd /tmp; cd lha-114i/src; cp lha /usr/local/bin/lha
chmod 755 /usr/local/bin/lha
cd /tmp; cd lha-114i; ${MAKE} install
cd /tmp; rm -rf lha-114i
echo mkisofs-1.13.tar.gz
echo CD-R writing
cd ${SROOT}; if [ ! -f mkisofs-1.13.tar.gz ]; then
wget ${SRCURL}/mkisofs-1.13.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/mkisofs-1.13.tar.gz | tar -xvof -
cd /tmp; cd mkisofs-1.13; ${MAKE}
cd /tmp; cd mkisofs-1.13; ${MAKE} install
cd /tmp; rm -rf mkisofs-1.13
echo mtools:
cd ${SROOT}; if [ ! -f mtools-3.9.10.tar.gz ]; then
wget ${SRCURL}/mtools-3.9.10.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/mtools-3.9.10.tar.gz | tar -xvof -
cd /tmp; cd mtools-3.9.10; ./configure --enable-vold
cd /tmp; cd mtools-3.9.10; ${MAKE} clean
cd /tmp; cd mtools-3.9.10; ${MAKE}
cd /tmp; cd mtools-3.9.10; ${MAKE} install
cd /tmp; rm -rf mtools-3.9.10
# It does not work ... ?
echo sudo-1.6.8p9:
echo superuser do allows a system administrator to give certain users or groups of users the ability to run some or all commands as root while logging all commands and arguments.
cd ${SROOT}; if [ ! -f sudo-1.6.8p9.tar.gz ]; then
wget ${SRCURL}/sudo-1.6.8p9.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/sudo-1.6.8p9.tar.gz | tar -xvof -
cd /tmp; cd sudo-1.6.8p9; ./configure
cd /tmp; cd sudo-1.6.8p9; ${MAKE} clean
cd /tmp; cd sudo-1.6.8p9; ${MAKE}
cd /tmp; cd sudo-1.6.8p9; ${MAKE} install
echo top-3.5beta13:
echo display process information
cd ${SROOT}; if [ ! -f top-3.5beta13.tar.gz ]; then
wget ${SRCURL}/top-3.5beta13.tar.gz
fi
rm -rf /tmp/top-3.5beta13
cd /tmp; ${GTAR} -xvzof ${SROOT}/top-3.5beta13.tar.gz
cd /tmp; cd top-3.5beta13; ./Configure sunos5
cd /tmp; cd top-3.5beta13; ${MAKE} clean
cd /tmp; cd top-3.5beta13; ${MAKE}
cd /tmp; cd top-3.5beta13; ${MAKE} install
cd /tmp; rm -rf top-3.5beta13
echo unzip551.tar.gz
echo unzip decompression utility
cd ${SROOT}; if [ ! -f unzip551.tar.gz ]; then
wget ${SRCURL}/unzip551.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/unzip551.tar.gz
cd /tmp; cd unzip-5.51; cp unix/Makefile .
cd /tmp; cd unzip-5.51; ${MAKE} clean
cd /tmp; cd unzip-5.51; ${MAKE} CC=gcc generic
cd /tmp; cd unzip-5.51; ${MAKE} install
echo uudeview-0.5.20:
echo encoder/decoder for files
cd ${SROOT}; if [ ! -f uudeview-0.5.20.tar.gz ]; then
wget ${SRCURL}/uudeview-0.5.20.tar.gz
fi
rm -rf /tmp/uudeview-0.5.20
cd /tmp; ${GTAR} -xvzof ${SROOT}/uudeview-0.5.20.tar.gz
cd /tmp; cd uudeview-0.5.20; ./configure
cd /tmp; cd uudeview-0.5.20; ${MAKE} clean
cd /tmp; cd uudeview-0.5.20; ${MAKE}
cd /tmp; cd uudeview-0.5.20; ${MAKE} install
cd /tmp; rm -rf uudeview-0.5.20
#
# Network
#
echo fping-2.4b2:
cd ${SROOT}; if [ ! -f fping-2.4b2.tar.gz ]; then
wget ${SRCURL}/fping-2.4b2.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/fping-2.4b2.tar.gz
cd /tmp; cd fping-2.4b2; ./configure
cd /tmp; cd fping-2.4b2; ${MAKE} clean
cd /tmp; cd fping-2.4b2; ${MAKE}
cd /tmp; cd fping-2.4b2; ${MAKE} install
cd /tmp; rm -rf fping-2.4b2
echo rsync-2.6.3
cd ${SROOT}; if [ ! -f rsync-2.6.3.tar.gz ]; then
wget ${SRCURL}/rsync-2.6.3.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/rsync-2.6.3.tar.gz | tar -xvof -
cd /tmp; cd rsync-2.6.3; ./configure
cd /tmp; cd rsync-2.6.3; ${MAKE} clean
cd /tmp; cd rsync-2.6.3; ${MAKE}
cd /tmp; cd rsync-2.6.3; ${MAKE} install
cd /tmp; rm -rf rsync-2.6.3
echo gnuplot
cd ${SROOT}; if [ ! -f gnuplot-4.0.0.tar.gz ]; then
wget ${SRCURL}/gnuplot-4.0.0.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/gnuplot-4.0.0.tar.gz | tar -xvof -
cd /tmp; cd gnuplot-4.0.0; ./configure
cd /tmp; cd gnuplot-4.0.0; ${MAKE} clean
cd /tmp; cd gnuplot-4.0.0; ${MAKE}
cd /tmp; cd gnuplot-4.0.0; ${MAKE} install
cd /tmp; rm -rf gnuplot-4.0.0
#
# X-Window Tools
#
echo fvwm-1.24r :
echo window manager
cd ${SROOT}; if [ ! -f fvwm-1.24r.tar.gz ]; then
wget ${SRCURL}/fvwm-1.24r.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/fvwm-1.24r.tar.gz
cd /tmp; cd fvwm-1.24r; ${XMKMF} -a
cd /tmp; cd fvwm-1.24r; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd fvwm-1.24r; ${MAKE} CC=gcc LD_RUN_PATH="${XLIBDIR}" XPMLIB="-L${XLIBDIR} -lXpm"
fi
cd /tmp; cd fvwm-1.24r; ${MAKE} LD_RUN_PATH="${XLIBDIR}" XPMLIB="-L${XLIBDIR} -lXpm"
cd /tmp; cd fvwm-1.24r; ${MAKE} install
cd /tmp; rm -rf fvwm-1.24r
echo fvwm95-2.0.43e :
echo window manager
cd ${SROOT}; if [ ! -f fvwm95-2.0.43e.tar.gz ]; then
wget ${SRCURL}/fvwm95-2.0.43e.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/fvwm95-2.0.43e.tar.gz
cd /tmp; cd fvwm95-2.0.43e; ./configure
cd /tmp; cd fvwm95-2.0.43e; ${MAKE} clean
cd /tmp; cd fvwm95-2.0.43e; ${MAKE} LD_RUN_PATH="${XLIBDIR}" XPMLIB="-L${XLIBDIR} -lXpm"
cd /tmp; cd fvwm95-2.0.43e; ${MAKE} install
cd /tmp; rm -rf fvwm95-2.0.43e
echo fvwm-2.4.19 :
echo window manager
cd ${SROOT}; if [ ! -f fvwm-2.4.19.tar.bz2 ]; then
wget ${SRCURL}/fvwm-2.4.19.tar.bz2
fi
cd /tmp; gtar -xvjof ${SROOT}/fvwm-2.4.19.tar.bz2
cd /tmp; cd fvwm-2.4.19; ./configure
cd /tmp; cd fvwm-2.4.19; ${MAKE} clean
cd /tmp; cd fvwm-2.4.19; ${MAKE} LD_RUN_PATH="${XLIBDIR}" XPMLIB="-L${XLIBDIR} -lXpm"
cd /tmp; cd fvwm-2.4.19; ${MAKE} install
cd /tmp; rm -rf fvwm-2.4.19
echo pstwm-2.0 :
cd ${SROOT}; if [ ! -f pstwm-2.0.tar.gz ]; then
wget ${SRCURL}/pstwm-2.0.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/pstwm-2.0.tar.gz
cd /tmp; cd pstwm-2.0/src; ${XMKMF} -a
cd /tmp; cd pstwm-2.0/src; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd pstwm-2.0/src; ${MAKE} CC=gcc CCLINK=cc CFLAGS="-O" CCOPTIONS="-O" EXTRA_LIBRARIES="-L/usr/local/lib -lsocket -lnsl -L/usr/ucb -lucb -lelf" all
fi
cd /tmp; cd pstwm-2.0/src; ${MAKE} CC=cc CCLINK=cc CFLAGS="-O" CCOPTIONS="-O" EXTRA_LIBRARIES="-L/usr/local/lib -lsocket -lnsl -L/usr/ucb -lucb -lelf" all
cd /tmp; cd pstwm-2.0/src; ${MAKE} all
cd /tmp; cd pstwm-2.0/src; ${MAKE} install
cd /tmp; rm -rf pstwm-2.0
echo tvtwm.pl11 :
cd ${SROOT}; if [ ! -f tvtwm.pl11.tar.gz ]; then
wget ${SRCURL}/tvtwm.pl11.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/tvtwm.pl11.tar.gz
cd /tmp; cd tvtwm; ${XMKMF} -a
cd /tmp; cd tvtwm; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd tvtwm; ${MAKE} CC=gcc all
fi
cd /tmp; cd tvtwm; ${MAKE} all
cd /tmp; cd tvtwm; ${MAKE} install
cd /tmp; rm -rf tvtwm
echo emiclock-2.0.2:
cd ${SROOT}; if [ ! -f emiclock-2.0.2.tar.gz ]; then
wget ${SRCURL}/emiclock-2.0.2.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/emiclock-2.0.2.tar.gz
cd /tmp; cd emiclock-2.0.2; ${XMKMF} -a
cd /tmp; cd emiclock-2.0.2; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd emiclock-2.0.2; ${MAKE} CC=gcc
fi
cd /tmp; cd emiclock-2.0.2; ${MAKE}
cd /tmp; cd emiclock-2.0.2; ${MAKE} install
cd /tmp; rm -rf emiclock-2.0.2
echo tgif-4.1.44:
echo drawing tool
cd ${SROOT}; if [ ! -f tgif-QPL-4.1.44.tar.gz ]; then
wget ${SRCURL}/tgif-QPL-4.1.44.tar.gz
fi
cd /tmp; ${GZIP} -d < ${SROOT}/tgif-QPL-4.1.44.tar.gz | tar -xvof -
cd /tmp; cd tgif-QPL-4.1.44; cp Tgif.tmpl-solaris Tgif.tmpl
cd /tmp; cd tgif-QPL-4.1.44; ${XMKMF}
cd /tmp; cd tgif-QPL-4.1.44; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd tgif-QPL-4.1.44; ${MAKE} CC=gcc tgif
fi
cd /tmp; cd tgif-QPL-4.1.44; ${MAKE} tgif
cd /tmp; cd tgif-QPL-4.1.44; ${MAKE} install
cd /tmp; cd tgif-QPL-4.1.44; ${MAKE} install.man
cd /tmp; rm -rf tgif-QPL-4.1.44
echo xcalendar:
cd ${SROOT}; if [ ! -f xcalendar.tar.gz ]; then
wget ${SRCURL}/xcalendar.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/xcalendar.tar.gz
cd /tmp; cd xcalendar; ${XMKMF} -a
cd /tmp; cd xcalendar; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd xcalendar; ${MAKE} CC=gcc
fi
cd /tmp; cd xcalendar; ${MAKE}
cd /tmp; cd xcalendar; ${MAKE} install
cd /tmp; rm -rf xcalendar
echo xcolors:
cd ${SROOT}; if [ ! -f xcolors.tar.gz ]; then
wget ${SRCURL}/xcolors.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/xcolors.tar.gz
cd /tmp; cd xcolors; ${XMKMF} -a
cd /tmp; cd xcolors; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd xcolors; ${MAKE} CC=gcc
fi
cd /tmp; cd xcolors; ${MAKE}
cd /tmp; cd xcolors; ${MAKE} install
cd ${SROOT}; if [ ! -f rgb.txt ]; then
wget ${SRCURL}/rgb.txt
fi
cd ${SROOT}; cp ${SROOT}/rgb.txt ${XDIR}/lib/X11/rgb.txt
cd /tmp; rm -rf xcolors
echo xcolorsel-1.1a:
cd ${SROOT}; if [ ! -f xcolorsel-1.1a.tar.gz ]; then
wget ${SRCURL}/xcolorsel-1.1a.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/xcolorsel-1.1a.tar.gz
cd /tmp; cd xcolorsel; ${XMKMF} -a
cd /tmp; cd xcolorsel; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd xcolorsel; ${MAKE} CC=gcc
fi
cd /tmp; cd xcolorsel; ${MAKE}
cd /tmp; cd xcolorsel; ${MAKE} install
cd /tmp; rm -rf xcolorsel
echo xephem-3.6.1:
cd ${SROOT}; if [ ! -f xephem-3.6.1.tar.gz ]; then
wget ${SRCURL}/xephem-3.6.1.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/xephem-3.6.1.tar.gz
cd /tmp; cd xephem-3.6.1; ${XMKMF} -a
cd /tmp; cd xephem-3.6.1; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd xephem-3.6.1; ${MAKE} CC=gcc
fi
cd /tmp; cd xephem-3.6.1; ${MAKE}
cd /tmp; cd xephem-3.6.1; ${MAKE} install
cd /tmp; rm -rf xephem-3.6.1
echo xgrabsc.2.41:
cd ${SROOT}; if [ ! -f xgrabsc.2.41.tar.gz ]; then
wget ${SRCURL}/xgrabsc.2.41.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/xgrabsc.2.41.tar.gz
cd /tmp; cd xgrabsc.2_41; ${XMKMF} -a
cd /tmp; cd xgrabsc.2_41; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd xgrabsc.2_41; ${MAKE} CC=gcc
fi
cd /tmp; cd xgrabsc.2_41; ${MAKE}
cd /tmp; cd xgrabsc.2_41; ${MAKE} install
cd /tmp; rm -rf xgrabsc.2_41
echo xhime151:
cd ${SROOT}; if [ ! -f xhime151.tar.gz ]; then
wget ${SRCURL}/xhime151.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/xhime151.tar.gz
cd /tmp; cd xhime1.51; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd xhime1.51; ${MAKE} CC=gcc -f Makefile.std
fi
cd /tmp; cd xhime1.51; ${MAKE} -f Makefile.std
cd /tmp; cd xhime1.51; cp rh110.xhm ${XDIR}/bin
cd /tmp; cd xhime1.51; cp rh110.xhm /usr/openwin/bin
cd /tmp; rm -rf xhime1.51
echo xphoon:
cd ${SROOT}; if [ ! -f xphoon.tar.gz ]; then
wget ${SRCURL}/xphoon.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/xphoon.tar.gz
cd /tmp; cd xphoon; /usr/openwin/bin/xmkmf
cd /tmp; cd xphoon; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd xphoon; ${MAKE} CC=gcc
fi
cd /tmp; cd xphoon; ${MAKE}
cd /tmp; cd xphoon; ${MAKE} install
cd /tmp; rm -rf xphoon
echo xrgb:
cd ${SROOT}; if [ ! -f xrgb-1.1.tar.gz ]; then
wget ${SRCURL}/xrgb-1.1.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/xrgb-1.1.tar.gz
cd /tmp; cd xrgb; ${XMKMF} -a
cd /tmp; cd xrgb; ${MAKE} clean
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd xrgb; ${MAKE} CC=gcc
fi
cd /tmp; cd xrgb; ${MAKE}
cd /tmp; cd xrgb; ${MAKE} install
cd /tmp; rm -rf xrgb
echo xscreensaver-4.21 :
cd ${SROOT}; if [ ! -f xscreensaver-4.21.tar.gz ]; then
wget ${SRCURL}/xscreensaver-4.21.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/xscreensaver-4.21.tar.gz
cd /tmp; cd xscreensaver-4.21; ${XMKMF} -a
if [ ! -f /opt/SUNWspro/bin/cc ]; then
cd /tmp; cd xscreensaver-4.21; ${MAKE} CC=gcc all
fi
cd /tmp; cd xscreensaver-4.21; ${MAKE} all
cd /tmp; cd xscreensaver-4.21; ${MAKE} install
cd /tmp; rm -rf xscreensaver-4.21
echo qt-x11-free-3.3.1:
echo Qt
cd ${SROOT}; if [ ! -f qt-x11-free-3.3.1.tar.gz ]; then
wget ${SRCURL}/qt-x11-free-3.3.1.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/qt-x11-free-3.3.1.tar.gz
cd /tmp; cd qt-x11-free-3.3.1; ./configure
cd /tmp; cd qt-x11-free-3.3.1; ${MAKE} all
cd /tmp; cd qt-x11-free-3.3.1; ${MAKE} install
cd /tmp; rm -rf qt-x11-free-3.3.1
echo kdebase-3.2.2 :
echo KDE. It depends on qt3.3
cd ${SROOT}; if [ ! -f kdebase-3.2.2.tar.gz ]; then
wget ${SRCURL}/kdebase-3.2.2.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/kdebase-3.2.2.tar.gz
cd /tmp; cd kdebase-3.2.2; ./configure
cd /tmp; cd kdebase-3.2.2; ${MAKE} all
cd /tmp; cd kdebase-3.2.2; ${MAKE} install
cd /tmp; rm -rf kdebase-3.2.2
echo kdelibs-3.2.2 :
echo KDE. It depends on qt3.3
cd ${SROOT}; if [ ! -f kdelibs-3.2.2.tar.gz ]; then
wget ${SRCURL}/kdelibs-3.2.2.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/kdelibs-3.2.2.tar.gz
cd /tmp; cd kdelibs-3.2.2; ./configure
cd /tmp; cd kdelibs-3.2.2; ${MAKE} all
cd /tmp; cd kdelibs-3.2.2; ${MAKE} install
cd /tmp; rm -rf kdelibs-3.2.2
#
# shell/language
#
echo tcl-8.4.6:
echo Tcl, the tool command language
cd ${SROOT}; if [ ! -f tcl-8.4.6.tar.gz ]; then
wget ${SRCURL}/tcl-8.4.6.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/tcl-8.4.6.tar.gz | tar -xvof -
cd /tmp; cd tcl8.4.6; cd unix; ./configure
cd /tmp; cd tcl8.4.6; cd unix; ${MAKE} clean
cd /tmp; cd tcl8.4.6; cd unix; ${MAKE}
cd /tmp; cd tcl8.4.6; cd unix; ${MAKE} install
cd /tmp; rm -rf tcl8.4.6
# It does not work ... ?
echo tk-8.4.6:
echo Tk, the X11 toolkit written in Tcl which you will need to install also. It requires tcl
cd ${SROOT}; if [ ! -f tk-8.4.6.tar.gz ]; then
wget ${SRCURL}/tk-8.4.6.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/tk-8.4.6.tar.gz | tar -xvof -
cd /tmp; cd tk8.4.6; cd unix; ./configure
cd /tmp; cd tk8.4.6; cd unix; ${MAKE} clean
cd /tmp; cd tk8.4.6; cd unix; ${MAKE}
cd /tmp; cd tk8.4.6; cd unix; ${MAKE} install
cd /tmp; rm -rf tk8.4.6
# It does not work ... ?
echo expect-5.4.0:
echo Expect is a program that performs programmed dialogue with other interactive programs. It requires tcl, tk.
cd ${SROOT}; if [ ! -f expect-5.4.0.tar.gz ]; then
wget ${SRCURL}/expect-5.4.0.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/expect-5.4.0.tar.gz
cd /tmp; cd expect-5.40; ./configure
cd /tmp; cd expect-5.40; ${MAKE} clean
cd /tmp; cd expect-5.40; ${MAKE}
cd /tmp; cd expect-5.40; ${MAKE} install
cd /tmp; rm -rf expect-5.40
echo ruby-1.8.1
cd ${SROOT}; if [ ! -f ruby-1.8.1.tar.gz ]; then
wget ${SRCURL}/ruby-1.8.1.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/ruby-1.8.1.tar.gz | tar -xvof -
cd /tmp; cd ruby-1.8.1; ./configure
cd /tmp; cd ruby-1.8.1; ${MAKE} clean
cd /tmp; cd ruby-1.8.1; ${MAKE}
cd /tmp; cd ruby-1.8.1; ${MAKE} install
cd /tmp; rm -rf ruby-1.8.1
#
# Imaging
#
# It does not work ... ?
echo gimp-2.3.14:
cd ${SROOT}; if [ ! -f gimp-2.3.14.tar.gz ]; then
wget ${SRCURL}/gimp-2.3.14.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/gimp-2.3.14.tar.gz | tar -xvof -
cd /tmp; cd gimp-2.3.14; ./configure
cd /tmp; cd gimp-2.3.14; ${MAKE} clean
cd /tmp; cd gimp-2.3.14; ${MAKE}
cd /tmp; cd gimp-2.3.14; ${MAKE} install
cd /tmp; rm -rf gimp-2.3.14
echo xv-3.10a
cd ${SROOT}; if [ ! -f xv-3.10a.tar.gz ]; then
wget ${SRCURL}/xv-3.10a.tar.gz
fi
cd ${SROOT}; if [ ! -f jpeg-v6b.tar.gz ]; then
wget ${SRCURL}/jpeg-v6b.tar.gz
fi
cd ${SROOT}; if [ ! -f tiff-3.8.2.tar.gz ]; then
wget ${SRCURL}/tiff-3.8.2.tar.gz
fi
cd ${SROOT}; if [ ! -f xv-3.10a-png-1.2d.tar.gz ]; then
wget ${SRCURL}/xv-3.10a-png-1.2d.tar.gz
fi
cd ${SROOT}; if [ ! -f libpng-1.2.23.tar.gz ]; then
wget ${SRCURL}/libpng-1.2.23.tar.gz
fi
cd /tmp; ${GTAR} -xvzof ${SROOT}/xv-3.10a.tar.gz
cd /tmp; cd xv-3.10a; rm -rf jpeg tiff
cd /tmp; cd xv-3.10a; ${GTAR} -xvzof ${SROOT}/jpeg-v6b.tar.gz
cd /tmp; cd xv-3.10a; ${GTAR} -xvzof ${SROOT}/tiff-3.8.2.tar.gz
cd /tmp; cd xv-3.10a; ${GTAR} -xvzof ${SROOT}/xv-3.10a-png-1.2d.tar.gz
cd /tmp; cd xv-3.10a; ${GTAR} -xvzof ${SROOT}/libpng-1.2.23.tar.gz
cd /tmp; cd xv-3.10a; /usr/local/bin/patch < xvpng.diff
cd /tmp; cd xv-3.10a; /usr/local/bin/patch < xcmap.diff
cd /tmp; cd xv-3.10a; /usr/local/bin/patch < xvjpeg.diff
cd /tmp; cd xv-3.10a; /usr/local/bin/patch < xvtiff.diff
echo PNGDIR=/usr/local, ZLIBDIR=/usr/local
cd /tmp; cd xv-3.10a; cd tiff-3.8.2; ./configure
cd /tmp; cd xv-3.10a; cd tiff-3.8.2; ${MAKE} clean
cd /tmp; cd xv-3.10a; cd tiff-3.8.2; ${MAKE} -k CC=gcc -I. -I/usr/local/include"
#
cd /tmp; cd xv-3.10a; cd jpeg-6b; ./configure
cd /tmp; cd xv-3.10a; cd jpeg-6b; ${MAKE} CC=gcc
#
cd /tmp; cd xv-3.10a;cd libpng-1.2.23; cp scripts/makefile.solaris Makefile
cd /tmp; cd xv-3.10a;cd libpng-1.2.23; ${MAKE}
#
cd /tmp; cd xv-3.10a; rm -f jpeg tiff png
cd /tmp; cd xv-3.10a; ln -s ./jpeg-6b jpeg
cd /tmp; cd xv-3.10a; ln -s ./tiff-3.8.2/libtiff tiff
cd /tmp; cd xv-3.10a; ln -s ./libpng-1.2.23 png
cd /tmp; cd xv-3.10a; ${MAKE} -k PNGDIR=/tmp/xv-3.10a/png CC=gcc
cd /tmp; cd xv-3.10a; ${MAKE} -k install
cd /tmp; rm -rf xv-3.10a
#
# TeX, PS
#
echo psutils-1.17
cd ${SROOT}; if [ ! -f psutils-1.17.tar.gz ]; then
wget ${SRCURL}/psutils-1.17.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/psutils-1.17.tar.gz | tar -xvof -
cd /tmp; cd psutils; ${MAKE} -f Makefile.unix
cd /tmp; cd psutils; cp psbook psselect pstops epsffit psnup psresize etafm showchar fixfmps fixmacps fixpsditps fixpspps fixtpps fixwfwps fixwpps fixscribeps fixwwps fixdlsrps extractres includeres psmerge /usr/local/bin
cd /usr/local/bin; chmod 755 psbook psselect pstops epsffit psnup psresize etafm showchar fixfmps fixmacps fixpsditps fixpspps fixtpps fixwfwps fixwpps fixscribeps fixwwps fixdlsrps extractres includeres psmerge
cd /tmp; rm -rf psutils
echo tetex-2.0.2
cd ${SROOT}; if [ ! -f tetex-src-2.0.2.tar.gz ]; then
wget ${SRCURL}/tetex-src-2.0.2.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/tetex-src-2.0.2.tar.gz | tar -xvof -
cd ${SROOT}; if [ ! -f tetex-texmf-2.0.2.tar.gz ]; then
wget ${SRCURL}/tetex-texmf-2.0.2.tar.gz
fi
cd /tmp; gzip -d < ${SROOT}/tetex-texmf-2.0.2.tar.gz | tar -xvof -
cd /tmp; cd tetex-src-2.0.2; ./configure
cd /tmp; cd tetex-src-2.0.2; ${MAKE} clean
cd /tmp; cd tetex-src-2.0.2; ${MAKE}
cd /tmp; cd tetex-src-2.0.2; ${MAKE} install
cd /tmp; rm -rf tetex-src-2.0.2
exit
#
#
#
Wnn4.2 :
cd /tmp; rm -rf Xsi
cd /tmp; ${GTAR} -xvzof ${SROOT}/wnn4.2.tar.gz
# for X11R6, Project.tmpl should be X11.tmpl
cd /tmp/Xsi; cd config; cp Project.tmpl X11.tmpl
cd /tmp/Xsi; imake -DUseInstalled -I/tmp/Xsi/config -I${XDIR}/lib/X11/config
cd /tmp/Xsi; gmake \
IMTOP=/tmp/Xsi TOP=${XDIR} \
MFLAGS="IMTOP=/tmp/Xsi TOP=${XDIR} PUBDICSRC=/tmp/Xsi/Pubdic WNNWNNDIR=${XDIR}/lib/wnn WNNBINDIR=${XDIR}/bin WNNINCDIR=${XDIR}/include \
MAKE='gmake IMTOP=/tmp/Xsi TOP=${XDIR}' " \
World -f Makefile.inst
cd /tmp/Xsi; make \
IMTOP=/tmp/Xsi TOP=${XDIR} \
MFLAGS="IMTOP=/tmp/Xsi TOP=${XDIR} PUBDICSRC=/tmp/Xsi/Pubdic WNNWNNDIR=${XDIR}/lib/wnn WNNBINDIR=${XDIR}/bin WNNINCDIR=${XDIR}/include \
MAKE='gmake IMTOP=/tmp/Xsi TOP=${XDIR}' " \
all
cd /tmp/Xsi; make \
IMTOP=/tmp/Xsi TOP=${XDIR} \
MFLAGS="IMTOP=/tmp/Xsi TOP=${XDIR} PUBDICSRC=/tmp/Xsi/Pubdic WNNWNNDIR=${WNNWNNDIR} WNNBINDIR=${XDIR}/bin WNNINCDIR=${XDIR}/include \
install
cd ${WNNWNNDIR}; ln -s ./ja_JP ja
cd /tmp/Xsi; cd config; rm -f X11.tmpl
# cp ${XDIR}/lib/X11/config/Imake.* ${XDIR}/lib/X11/config/site.* ${XDIR}/lib/X11/config/sun*.* ${XDIR}/lib/X11/config/svr*.* ${XDIR}/lib/X11/config/xfree86.* ${XDIR}/lib/X11/config/sv4Lib.* ${XDIR}/lib/X11/config/xf86.* ${XDIR}/lib/X11/config/Library.* ${XDIR}/lib/X11/config/noop.* /tmp/Xsi/config
本サイトは金子邦彦研究室のWebページである．
資料等の公開では，原則，「クリエイティブコモンズ BY NC SA」として公開するようにしている． PDFファイル，パワーポイントファイルなどには， 「クリエイティブコモンズ BY NC SA」を明記するとともに，ロゴを記載するようにしている（作業が間に合っていない分もあるのでご容赦ください）．
公開している資料をご利用になる場合の，再配布の条件，剽窃の防止などについて，別ページ »で説明 再配布や資料改変の際には，そのページをご確認ください．
サイトマップは，サイトマップのページをご覧下さい． 本サイト内の検索は，サイト内検索のページをご利用下さい．
問い合わせ先： 金子邦彦（かねこ くにひこ） ![[image]](https://www.kkaneko.jp/info/kanekomail.png)